AM65x Industrial SoM

A compact SOM based on a TI 64-bit AM6548 SoC, plus a dual-core MCU and up to 4GB DDR4 and 32GB eMMC. I/O includes LVDS, RGB, MIPI CSI, 6x GbE, USB, SPI, UART, CAN, I2C, PWM, GPIO, and PCIe.


(click image for a larger view)


Overview... System-on-Chip...
  • TI AM6548
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.1
Additional processors (if any)...
  • GPU (graphics) -- PowerVR SGX544-MP1 (3D)
  • MCU (microcontroller) -- ARM Cortex-R5F
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 4
  • Type -- DDR4
  • ECC support -- Yes
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 8.0
  • Type -- eMMC (up to 32GB)
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- Other format, via pin header, etc.
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 2
  • USB host types -- 1x 2.0 + 1x 3.1 SuperSpeed Gen1
  • USB OTG ports -- 0
Ethernet...
  • Ethernet interfaces -- 6
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- Open LDI (LVDS), parallel RGB
Camera interfaces...
  • Number of camera ports -- 2
  • Camera interface types -- MIPI-CSI2, VIN
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- n/a
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 0
  • ADC -- 2
  • PWM -- 6
  • SPI -- 2
  • I2C -- 4
  • UARTs -- 5
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) -- discrete power regulators
  • Lithium battery support -- no
Operating system support...
  • Linux -- Linux
  • Android -- Android Pie
  • Windows --
  • Other OSes -- VxWorks
Other features not listed elsewhere:

Peripherals support — not all of these can be operated simultaneously; the available functions depend on configuration of internally multiplexed pins:
* SERDES to support USB3.1 (SuperSpeed Gen1) / PCIe x2 / SGMII
* 1x USB2.0
* OSPI (Hyper Bus)
* 6x eHRPWM
* 3x Enhanced Quadrature Encoded Pulse (EQEP)
* 6x PRU_ICSSG PWM
* 2x 8-channel ADC (ADC0, ADC1)
* 2x CAN
* GPMC
* 3x MCASP
* MMC/SDIO/SD
* 4x I2C, 2x SPI, 5x UART
* Up to 40 GPIOs
Other functions available include…
* JTAG
* 1x GbE (CPSW) + 6x GbE (PRU_ICSSG); both supporting RGMII
* supported with an optional development kit ($685)

Physical specs...
  • Width (mm) -- 90
  • Height (mm) -- 63
  • Depth (mm) -- 0
  • Weight (gm) --
  • Input voltage, min. (V) -- 3
  • Input voltage, max. (V) -- 3.3
  • Input current, min. (A) -- 2
  • Input current, max. (A) -- 8
  • Operating temp., min. (°C) -- -40
  • Operating temp., max. (°C) -- 85
  • Certifications -- (none listed)
Further information...
[board ID = 421]

Share your impressions of this board with the HackerBoards community...