Banana Pi BPI-EAI80

The AI-oriented BPI-EAI80 SBC is based on an Edgeless EAI80 SoC (2x Cortex-M4F cores and an NPU) plus 8MB RAM and SPI flash storage. Key features include an ESP8266 WiFi module, 2x on-board mics, ports for LCD, camera, USB, and CANbus, plus 40-pin GPIO.


(click image to enlarge)

Product overview...
  • Board Name:   Banana Pi BPI-EAI80
  • Category:   SBC
  • Model:  
  • Manufacturer:   SinoVoip
  • Official website:   click here
  • Price (USD):   $16
  • Additional info may be found via this automated Google search
  • Posted 2020-10-10 5:18pm
System-on-Chip...
  • Edgeless EAI80
  • Primary processor type:   Arm Cortex-M4F
  • Primary processor word-width:   32-bit
  • Primary processor cores:   2
  • Primary processor clock rate (GHz):   0.200
Additional processors (if any)...
  • GPU (graphics):  
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):   300MHz CNN-NPU AI accelerator
System RAM...
  • Maximum capacity (GB):   .008
  • Type:   SDRAM (8MB)
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):  
  • Type:   SPI flash
  • Factory installed?   No
Removable solid-state storage...
  • Interface type:  
  • m.2 interfaces:  
  • m.2 NVMe support:  
SATA support...
  • SATA ports:  
USB ports...
  • USB host ports:   1
  • USB OTG ports:  
  • USB port types:   2.0 Type C
Ethernet...
  • Ethernet interfaces:  
  • Maximum LAN speed (Mbps):  
  • Wake-on-LAN support?  
Wireless...
  • WiFi:   802.11 a/b/g/n
  • Bluetooth:  
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:  
  • HDMI version:  
  • Max. HDMI resolution:  
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:  
  • Other display interfaces (DSI, LVDS, VGA...):   LVDS LCD interface (1024 x 768)
Camera interfaces...
  • Number of camera ports:   1
  • Camera interface types:   DVP
Audio I/O...
  • Analog audio out:  
  • Audio connector type:  
  • Audio via HDMI?  
  • I2S interfaces:  
  • SPDIF interfaces:  
  • Line inputs:  
  • Mic inputs:  
  • On-board microphones:  
Other I/O...
  • GPIO:   40
  • ADC:  
  • PWM:  
  • SPI:  
  • I2C:  
  • UARTs:   1
  • RS232 (or 485 or 422):  
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:  
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:   3.7V Li-ion battery connector
Operating system support...
  • Linux:   Linux SDK
  • Android:  
  • Windows:  
  • Other OSes:  
Other features not listed elsewhere...

* WiFi via on-board ESP8266 module
* CANbus 2.0 A/B interface
* Debug UART
* Reset and wake-up buttons
* 40-pin GPIO connector (shared with LCD interface)
* Power input via USB connector
* $80 kit includes SBC, touch-screen, camera, and 5V/2A power supply

Physical specs...
  • Width (mm):   86
  • Height (mm):   54
  • Depth (mm):  
  • Weight (gm):  
  • Input voltage, min. (V):   5
  • Input voltage, max. (V):  
  • Input current, min. (A):  
  • Input current, max. (A):   2
  • Operating temp., min. (°C):  
  • Operating temp., max. (°C):  
  • Certifications:  

Print Friendly, PDF & Email

[board ID = 489]

Share your impressions of this board with the HackerBoards community...