Banana Pi BPI-F2S

The Banana Pi BPI-F2S is based on a SunPlus SP7021 SoC, with 4x Cortex-A7 CPU cores, plus ARM926 and 8051 real-time cores. I/O includes Raspberry Pi compatible expansion, plus A/V, USB, serial, Ethernet ports, and connectors for an optional FPGA module.


(click image for a larger view)


Overview... System-on-Chip...
  • SunPlus SP7021
  • Primary processor type -- ARM Cortex-A7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1
Additional processors (if any)...
  • GPU (graphics) --
  • MCU (microcontroller) -- 8051, ARM A926
  • FPGA (gates) -- optional add-on module
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 1
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 8.0
  • Type -- eMMC up to 8GB
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 2
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 100
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 1.4
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- parallel LCD
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- MIPI-CSI
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- n/a
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 0
  • ADC -- 0
  • PWM -- 0
  • SPI -- 0
  • I2C -- 0
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- Yes
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- Yocto-based Linux
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* 2x 50-pin FPGA expansion interface (supports Trenz Electronic TE0725LP-01-100-2D Artix 7 FPGA module)
* UART/JTAG interface
* 1x user LED
* Buttons/switches: boot selection, power, reset
* TPM2.0 chip (ST33TPH2EI2C)
* Powered via 12VDC barrel jack
* Claimed to be an "industrial-grade board"
* Dimensions listed are estimated

Physical specs...
  • Width (mm) -- 130
  • Height (mm) -- 75
  • Depth (mm) -- 0
  • Weight (gm) --
  • Input voltage, min. (V) -- 12
  • Input voltage, max. (V) -- 12
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) -- -40
  • Operating temp., max. (°C) -- 85
  • Certifications -- (none listed)
Further information...
[board ID = 396]

Share your impressions of this board with the HackerBoards community...