Banana Pi M2M “Magic”

Banana Pi M2M “Magic” is a compact single board computer by SinoVoip, mostly aimed at IoT applications. The board comes in different variants (AllWinner R16 or A33 SoC, 8/16/32/64GB internal flash storage), all powered by a quad-core ARM Cortex-A7 SoC and 512MB of RAM. Despite lacking HDMI and Ethernet interfaces, the board offers Wi-Fi b/g/n, Bluetooth 4.0 LE, LVDS and several other interfaces, and can also be powered by a 3.7V Lithium battery.


(click image for a larger view)


Overview...
  • Board Name -- Banana Pi M2M "Magic"
  • Category -- SBC
  • Model (if known) -- BPI-M2M
  • Manufacturer -- SinoVoip
  • Official website -- http://bananapi.com/
  • Price (if known) -- $23 (USD)
  • Additional info may be found via this automated Google search
  • Dated posted -- Jan. 1, 2017 12:00am
System-on-Chip...
  • AllWinner R16 / A33
  • Primary processor type -- ARM Cortex-A7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.2
Additional processors (if any)...
  • GPU (graphics) -- Mali-400 MP2
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 1
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 64.0
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 1
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 0
  • Maximum LAN speed (Mbps) --
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11b/g/n 2.4GHz (AP6212)
  • Bluetooth -- 4.0 BLE
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- MIPI DSI (LVDS via header)
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- CSI
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- n/a
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 1
Other I/O...
  • GPIO -- 40
  • ADC -- 0
  • PWM -- 1
  • SPI -- 1
  • I2C -- 1
  • UARTs -- 2
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support -- yes
Operating system support...
  • Linux -- yes
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

40-pin GPIO header
Display: MIPI Display Serial Interface (DSI) interface, 4 data lanes
Camera: CSI input, supports 8-bit YUV422 CMOS sensor interface, CCIR656 protocol for NTSC and PAL, 5Mpxl camera sensor, video capture up to [email protected]
Video decoder: multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 ([email protected])
Video encoder: H.264 ([email protected])
3.7V Lithium cell support

Physical specs...
  • Width (mm) -- 51
  • Height (mm) -- 51
  • Depth (mm) -- 11
  • Weight (gm) -- 40
  • Input voltage, min. (V) -- 3.7
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 1
  • Input current, max. (A) -- 2
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications -- (none listed)
Further information...
[board ID = 157]

Share your impressions of this board with the HackerBoards community...