CL-SOM-iMX8X

The CL-SOM-iMX8X is a rugged, SODIMM-style SOM based on NXP’s quad-core 1.2GHz i.MX8X SoC, and featuring up to 4GB RAM and 64GB eMMC, plus I/O including MIPI-DSI, MIPI-CSI, WiFi, BT, PCIe, and multiple USB, UART, GPIO, and GbE ports.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX8 QuadXPlus
  • Primary processor type -- ARM Cortex-A35
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.2
Additional processors (if any)...
  • GPU (graphics) -- GC7000Lite
  • MCU (microcontroller) -- ARM Cortex-M4F @266GHz
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) -- Tensilica HiFi 4 DSP
System RAM...
  • Maximum capacity (GB) -- 4
  • Type -- LPDDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 64.0
  • Type -- eMMC
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- Other format, via pin header, etc.
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 4
  • USB host types -- 1x 2.0 + 3x 2.0
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 3
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11ac
  • Bluetooth -- 4.2 BLE
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 2x MIPI-DSI; 2x LVDS; up to 1080p60
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- MIPI-CSI (4 lanes)
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- n/a
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 1
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 96
  • ADC -- 5
  • PWM -- 4
  • SPI -- 4
  • I2C -- 4
  • UARTs -- 4
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support -- yes
Operating system support...
  • Linux -- Linux 4.14+, Yocto 2.5+, U-Boot bootloader
  • Android --
  • Windows --
  • Other OSes -- RTOS BSP
Other features not listed elsewhere:
  • Options for 1GB to 4GB LPDDR4 RAM
  • 204-pin SODIMM edge connector provides baseboard interface
  • JTAG interface
  • Optional -20 to 70 and -40 to 85 deg C operating temperature ranges
  • 20G/20ms shock; 200G/0-600Hz vibration ratings
  • Optional $395 evaluation kit
    Physical specs...
    • Width (mm) -- 68
    • Height (mm) -- 38
    • Depth (mm) -- 5
    • Weight (gm) -- 14
    • Input voltage, min. (V) -- 4
    • Input voltage, max. (V) -- 4.5
    • Input current, min. (A) -- 0
    • Input current, max. (A) -- 0
    • Operating temp., min. (°C) -- 0
    • Operating temp., max. (°C) -- 70
    • Certifications -- (none listed)
    Further information...
    [board ID = 377]

    • Share your impressions of this board with the HackerBoards community...