CubieTruck Plus (Cubieboard 5)

CubieTruck Plus is the fifth board of the successful CubieBoard series, which offers very high performance and lots of features in a fairly small form factor. Here are some of the most interesting features the official page reports:

  • Subboard support Raid
    CubieTruck Plus can be connected directly to the SATA hard disk, but also can be built to a dual hard disk array by HDD-RAID subboard which transformed from USB3.0/SATA III to Dual SATA III interfaces. HDD can be configured as 4 modes : RAID0, RAID1, JOBD, PM. Due to its rich Raid modes, people can improve the transmission rate and the safety of data redundancy. This configration can be widely used in these occasions for big data capacity, especially high data security.
  • Dual display and simultaneous display
    CubieTruck Plus supports DP (Display Port) and HDMI display solutions, and supports dual display and simultaneous display (two screens show the same picture at the same time), also suppor


(click image for a larger view)


Overview...
  • Board Name -- CubieTruck Plus (Cubieboard 5)
  • Category -- SBC
  • Model (if known) --
  • Manufacturer -- Cubietech
  • Official website -- http://cubieboard.org/
  • Price (if known) -- $99 (USD)
  • Additional info may be found via this automated Google search
  • Dated posted -- Jan. 1, 2017 12:00am
System-on-Chip...
  • AllWinner H8
  • Primary processor type -- ARM Cortex-A7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 8
  • Primary processor clock rate (GHz) -- 2
Additional processors (if any)...
  • GPU (graphics) -- PowerVR SGX544
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 2
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 8.0
  • Type -- eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 1
USB ports...
  • USB hosts -- 1
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11 b/g/n (dual band)
  • Bluetooth -- 4
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 2
  • Camera interface types -- CSI
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- 3.5mm jack
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 1
  • Line inputs -- 1
  • Mic inputs -- 1
  • On-board microphones -- 1
Other I/O...
  • GPIO -- 70
  • ADC -- 1
  • PWM -- 1
  • SPI -- 1
  • I2C -- 1
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- Yes
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android -- Android 4.4.4
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

System Memory 2GB RAM (4x H5TQ4G63AFR-PCB DDR3 chips)
Storage FORESEE eMMC or NAND flash + micro SD card slot + SATA port (via GL830 USB 2.0 to SATA bridge)
Video Output HDMI and DisplayPort
Connectivity Gigabit Ethernet (RTL8211E), dual band WiFi 802.11 b/g/n and Bluetooth 4.0 (AP6330 module)

Physical specs...
  • Width (mm) -- 110
  • Height (mm) -- 80
  • Depth (mm) -- 14
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 2
  • Input current, max. (A) -- 3
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications -- (none listed)
Further information...
[board ID = 123]

Share your impressions of this board with the HackerBoards community...