DART-MX6

The DART-MX6 is a tiny SoM based on NXP’s i.MX6 quad/dual Cortex-A9 SoC, plus up to 2GB RAM, 64GB eMMC, and SD/MMC expansion. I/O includes GbE LAN, WiFi/BT, and multiple USB, display, camera, serial, and GPIO signals.


(click image to enlarge)

Product overview...
  • Board Name:   DART-MX6
  • Category:   module
  • Model:  
  • Manufacturer:   Variscite
  • Official website:   click here
  • Price (USD):   $67
  • Additional info may be found via this automated Google search
  • Posted 2020-11-07 3:28pm
System-on-Chip...
  • NXP i.MX6 Quad/Dual
  • Primary processor type:   Arm Cortex-A9
  • Primary processor word-width:   32-bit
  • Primary processor cores:   4
  • Primary processor clock rate (GHz):   0.800
Additional processors (if any)...
  • GPU (graphics):   Vivante GC2000
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   2
  • Type:   LPDDR2
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   64
  • Type:   eMMC
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   SD/MMC
  • m.2 interfaces:  
  • m.2 NVMe support:  
SATA support...
  • SATA ports:  
USB ports...
  • USB host ports:   1
  • USB OTG ports:   1
  • USB port types:   USB2.0 (1x Host, 1x OTG)
Ethernet...
  • Ethernet interfaces:   1
  • Maximum LAN speed (Mbps):   1000
  • Wake-on-LAN support?  
Wireless...
  • WiFi:   802.11 a/b/g/n + MIMO
  • Bluetooth:   4.1 BLE with CSA2 support
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:   1
  • HDMI version:   1.4
  • Max. HDMI resolution:   1080p
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:  
  • Other display interfaces (DSI, LVDS, VGA...):   1x MIPI-DSI, 2x LVDS, 24-bit parallel LCD
Camera interfaces...
  • Number of camera ports:   2
  • Camera interface types:   1x CXI, 1x CPI
Audio I/O...
  • Analog audio out:   1
  • Audio connector type:   via board edge fingers
  • Audio via HDMI?   yes
  • I2S interfaces:   1
  • SPDIF interfaces:   1
  • Line inputs:  
  • Mic inputs:   1
  • On-board microphones:  
Other I/O...
  • GPIO:   31
  • ADC:  
  • PWM:   4
  • SPI:   4
  • I2C:   3
  • UARTs:   5
  • RS232 (or 485 or 422):  
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:  
  • PMIC/PMU (power management controllers):   PMPF0100
  • Lithium battery support:   yes
Operating system support...
  • Linux:   Yocto, Debian, Boot2Qt
  • Android:   Yes
  • Windows:  
  • Other OSes:  
Other features not listed elsewhere...

* Connects to baseboard via 2 x 80-pin and 1 x 50-pin connectors
* Additional interface signals located on board-to-board connectors — digital microphone input, ESAI, PCIe, 2x CAN Bus
* Optional carrier board is available
* Optional extended operating temp. ranges of -20 to +85 deg. C and -40 to +85 deg. C are available

Physical specs...
  • Width (mm):   50
  • Height (mm):   20
  • Depth (mm):  
  • Weight (gm):  
  • Input voltage, min. (V):   3.3
  • Input voltage, max. (V):   4.5
  • Input current, min. (A):   0.2
  • Input current, max. (A):   0.5
  • Operating temp., min. (°C):   0
  • Operating temp., max. (°C):   70
  • Certifications:  

Print Friendly, PDF & Email

[board ID = 499]

Share your impressions of this board with the HackerBoards community...