EDM1-CF-LS1021A

Jan. 1, 2017 12:00am – The EDM1-CF-LS1021A SBC from TechNexion is based on a 2-core 32-bit QorIQ LS1021A backed by up to 2GB RAM.

(click image for a larger view)


Board description:
Overview... System-on-Chip...
  • QorIQ LS1021A
  • Primary processor type -- ARM Cortex-A7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 2
  • Primary processor clock rate (GHz) -- 1
Additional processors (if any)...
  • GPU (graphics) --
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 2
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.5
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface ype -- Other format, via pin header, etc.
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 1
USB ports...
  • USB hosts -- 1
  • USB host types -- (2.0 host, 3.0 OTG)
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- Other format, via pin header, etc.
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 8
  • ADC -- 0
  • PWM -- 0
  • SPI -- 0
  • I2C -- 0
  • UARTs -- 0
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android --
  • Windows -- Windows Embedded Compact 7
  • Other OSes --
Other features not listed elsewhere:

– 1GB to 2GB DDR3 with ECC; optional 512MB NAND; SDIO; SATA 3.0
– Single-channel 18/24-bit LVDS (optional)
– Single-channel I2S audio
– 2x UART
– 2x Flex CAN 2.0B
– SPI, I2C, I2S, GPIO
– JTAG (via thruhole)
– 2x PCIe 2.0
– Shock resistance: 50G / 25ms
– Vibration resistance: 20G / 0-600Hz
– SODIMM style “EDM” form factor (EDM1 with 314-pin MXM connector)
– OS: Linux; Yocto Linux; extended support for WEC7 and RTOSes

Physical specs...
  • Width (mm) -- 82
  • Height (mm) -- 60
  • Depth (mm) -- 3
  • Weight (gm) -- 20
  • Input voltage, min. (V) -- 4.8
  • Input voltage, max. (V) -- 5.3
  • Input current, min. (A) -- 0.4
  • Input current, max. (A) -- 1
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications -- (none listed)
Further information...
[board ID = 70]

Share your impressions of this board with the HackerBoards community...