efusA9

efusA9 is a secure computer-on-module based on NXP’s 1GHz i.MX6 SoC with 1, 2, or 4 ARM Cortex-A9 cores, and featuring up to 2GB RAM and 32GB eMMC. Interfaces include GbE, LVDS, MIPI-CSI, USB, UARTs, CAN, SD, PCIe, and more.


(click image to enlarge)

Product overview...
  • Board Name:   efusA9
  • Category:   SBC
  • Model:  
  • Manufacturer:   FS Elektronik Systeme
  • Official website:   click here
  • Price (USD):  
  • Additional info may be found via this automated Google search
  • Posted 2020-01-11 12:00am
System-on-Chip...
  • NXP i.MX6
  • Primary processor type:   ARM Cortex-A9 (1, 2, or 4 cores)
  • Primary processor word-width:   32-bit
  • Primary processor cores:   4
  • Primary processor clock rate (GHz):   1
Additional processors (if any)...
  • GPU (graphics):   2D, 3D
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   2
  • Type:  
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   2
  • Type:   2GB eMMC; opt. SPI NOR; opt. I2C EEPROM
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   Other format
  • m.2 interfaces:   0
  • m.2 NVMe support:  
SATA support...
  • SATA ports:   1
USB ports...
  • USB host ports:   1
  • USB OTG ports:   0
  • USB port types:  
Ethernet...
  • Ethernet interfaces:   1
  • Maximum LAN speed (Mbps):   1000
  • Wake-on-LAN support?  
Wireless...
  • WiFi:  
  • Bluetooth:  
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:   0
  • HDMI version:  
  • Max. HDMI resolution:  
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:   0
  • Other display interfaces (DSI, LVDS, VGA...):   DVI; 2x 24-bit LVDS
Camera interfaces...
  • Number of camera ports:   1
  • Camera interface types:   MIPI-CSI or 8-bit parallel
Audio I/O...
  • Analog audio out:   0
  • Audio connector type:  
  • Audio via HDMI?   0
  • I2S interfaces:   1
  • SPDIF interfaces:   0
  • Line inputs:   0
  • Mic inputs:   0
  • On-board microphones:   0
Other I/O...
  • GPIO:   0
  • ADC:   0
  • PWM:   0
  • SPI:   2
  • I2C:   2
  • UARTs:   4
  • RS232 (or 485 or 422):   0
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:   yes
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:   Buildroot, Yocto (u-boot installed)
  • Android:  
  • Windows:   WEC 7, WEC 2013 (Bootloader installed)
  • Other OSes:  
Other features not listed elsewhere...

* MXM form-factor card with 230-pin edge connector* 2x SD-card interfaces (via edge connector)* PCIe expansion (via edge connector)* Optionally available with up to 2GB RAM and up to 32GB eMMC* Optionally available for -20 to +85 deg. C operating temp.* Availability through 2027

Physical specs...
  • Width (mm):   47
  • Height (mm):   62
  • Depth (mm):   11
  • Weight (gm):   15
  • Input voltage, min. (V):   5
  • Input voltage, max. (V):   5
  • Input current, min. (A):   5
  • Input current, max. (A):   5
  • Operating temp., min. (°C):   0
  • Operating temp., max. (°C):   70
  • Certifications:   ROHS

Print Friendly, PDF & Email

[board ID = 405]

Share your impressions of this board with the HackerBoards community...