efusMX8X

Compact computer-on-module based on a choice of NXP’s i.MX8X SoCs and featuring up to 2GB RAM and 64GB eMMC, plus 4k video, MIPI-CSI, GbE, USB, CAN, and various GPIOs, WiFi/BT wireless, and optional -20 to 85 deg. C operation.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX8 DualX/QuadXPlus
  • Primary processor type -- ARM Cortex-A35
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.2
Additional processors (if any)...
  • GPU (graphics) -- 2D, 3D
  • MCU (microcontroller) -- ARM Cortex-M4
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 2
  • Type -- LPDDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.5
  • Type -- 64GB eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- none
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 2
  • USB host types -- 1x USB 2.0, 1x USB 3.0 OTG
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11ac/a/b/g/n
  • Bluetooth -- 5.0 LE with antenna socket
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- LVDS (2x 24bit, opt. 1x 18bit über MXM2), MIPI-DSI (2x)
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- MIPI-CSI2 (parallel 8-bit)
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- Other format, via pin header, etc.
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 0
  • ADC -- 5
  • PWM -- 0
  • SPI -- 2
  • I2C -- 4
  • UARTs -- 4
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- Yocto (uboot installed)
  • Android --
  • Windows --
  • Other OSes -- FreeRTOS
Other features not listed elsewhere:

* Uses MXM2 edge connector for carrier board interface* 2x CAN interfaces * Analog resistive and PCAP touch via I2C * Secure authenticator: NXP A71CH * JTAG interface* Extended operating temp. options (deg. C): -20 to 70, or -40 to 85* Long term availability to 2028

Physical specs...
  • Width (mm) -- 47
  • Height (mm) -- 62
  • Depth (mm) -- 11
  • Weight (gm) -- 15
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 0.8
  • Input current, max. (A) -- 0.8
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 70
  • Certifications -- ROHS
Further information...
[board ID = 399]

Share your impressions of this board with the HackerBoards community...