FZ3 Card

Built around a Zynq UltraScale+ MPSoC, the FZ3 Card is aimed at deep learning applications, in markets including consumer devices, robotics, transportation, UAVs, etc.


(click image to enlarge)

Product overview...
  • Board Name -- FZ3 Card
  • Category -- SBC
  • Model -- MYS-ZU3EG-8E4D-EDGE-K2
  • Manufacturer -- MYIR
  • Official website -- click here
  • Price -- $259 (USD)
  • Additional info may be found via this automated Google search
  • Posted 2020-07-24 12:00am
System-on-Chip...
  • Xilinx Zynq UltraScale ZU3EG
  • Primary processor type -- Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.2
Additional processors (if any)...
  • GPU (graphics) -- Mali-400 MP2
  • MCU (microcontroller) -- 600MHz dual-core Cortex-R5
  • FPGA (gates) -- Xilinx Zynq UltraScale
  • Other (DSP, FPU, NPU, TPU, AI...) -- none
System RAM...
  • Maximum capacity (GB) -- 4
  • Type -- DDR4
  • ECC support -- No
  • Factory installed? -- No
On-board solid-state storage...
  • Maximum capacity (GB) -- 8
  • Type -- eMMC
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- microSD (up to 128GB)
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB host ports -- 2
  • USB OTG ports -- 0
  • USB port types -- 1x 3.0 and 1x 2.0
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- n/a
  • Bluetooth -- n/a
  • Broadband -- n/a
  • LoRa -- n/a
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version -- n/a
  • Max. HDMI resolution -- n/a
  • FPS at max. resolution --
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 1 x Mini DisplayPort (4K/30fps, 2-lane)
Camera interfaces...
  • Number of camera ports -- 2
  • Camera interface types -- 1x MIPI-CSI and 1x BT1120
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- none
  • Audio via HDMI? -- 0
  • I2S interfaces -- 0
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO --
  • ADC -- 0
  • PWM -- 0
  • SPI -- 0
  • I2C -- 0
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 1
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) -- unknown
  • Lithium battery support -- no
Operating system support...
  • Linux -- PetaLinux
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* 2x 40-pin expansion I/O connectors, with: 1x CAN, 1x RS485, 2x USB Host 2.0, 12x HD_IO pairs, 9x HP_IO, 4x PS_MIO).
* LEDs: 1x power, 4x status
* 2x buttons: FPGA reset, system reset
* JTAG port
* USB-to-UART 1 x FPGA Reset Button, 1 x System Reset Button

Physical specs...
  • Width (mm) -- 100
  • Height (mm) -- 70
  • Depth (mm) --
  • Weight (gm) --
  • Input voltage, min. (V) -- 12
  • Input voltage, max. (V) -- 12
  • Input current, min. (A) -- 2
  • Input current, max. (A) -- 2
  • Operating temp., min. (°C) -- -40
  • Operating temp., max. (°C) -- 85
  • Certifications --

Print Friendly, PDF & Email

[board ID = 450]

Share your impressions of this board with the HackerBoards community...