i.MX6Q SBC

An SBC based on the NXP i.MX6 Quad-core SoC, and featuring 1G DDR3, 8G eMMC, SATA, HDMI/LVDS display outputs, CSI camera input, and mini-PCIe expansion.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX6Quad
  • Primary processor type -- ARM Cortex-A9
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1
Additional processors (if any)...
  • GPU (graphics) -- Vivante GC355
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 1
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 8.0
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 1
USB ports...
  • USB hosts -- 1
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- IEEE 802.1 1b/g/n
  • Bluetooth -- 4
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- RGB 24-bit (2x 8-bit LVDS interface)
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- CSI
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- 3.5mm jack
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 220
  • ADC -- 5
  • PWM -- 1
  • SPI -- 2
  • I2C -- 3
  • UARTs -- 5
  • RS232 (or 485 or 422) -- 1
  • IR receiver -- Yes
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support -- yes
Operating system support...
  • Linux -- Linux 3.0.35 and 4.1.1 with QT support
  • Android -- Android 4.4, 6.0
  • Windows --
  • Other OSes --
Other features not listed elsewhere:
  • CAN: 2x
  • TF/SD: 2x
  • PMU: MMPF0100NPEP
  • Li-Ion battery support (up to 2 batteries)
  • Speaker output
  • RS485: 1x
  • Camera: 5MP parallel camera, OV5640
  • SDIO: 2x (1x used by TF/SD slot)
  • GPS: 1,VK1613S3M5 module, SIRF3,with external antenna
  • 3G: Support 3G module with mini-PCIE interface, SIM card slot is on the backside of the baseboard.
  • Mini PCI Express slot
Physical specs...
  • Width (mm) -- 60
  • Height (mm) -- 60
  • Depth (mm) -- 4
  • Weight (gm) --
  • Input voltage, min. (V) -- 12
  • Input voltage, max. (V) -- 12
  • Input current, min. (A) -- 0.2
  • Input current, max. (A) -- 0.5
  • Operating temp., min. (°C) -- -40
  • Operating temp., max. (°C) -- 85
  • Certifications -- (none listed)
Further information...
[board ID = 135]

Share your impressions of this board with the HackerBoards community...