Inforce 6560

Pico-ITX form factor SBC based on octa-core Qualcomm Snapdragon 660 SoC, with 3GB RAM, 32GB eMMC storage, and extensive I/O including HDMI, MIPI-DSI and -CSI, GbE, WiFi, BT, GPS, USB2/3 ports, and an I/O expansion interface.

Feb. 6, 2019 4:44pm – The Inforce 6560 SBC from Inforce is based on a 8-core 64-bit Qualcomm Snapdragon 660 (SDA660) backed by up to 3GB RAM.

(click image for a larger view)


Board description:

    Pico-ITX form factor SBC based on octa-core Qualcomm Snapdragon 660 SoC, with 3GB RAM, 32GB eMMC storage, and extensive I/O including HDMI, MIPI-DSI and -CSI, GbE, WiFi, BT, GPS, USB2/3 ports, and an I/O expansion interface.

Overview... System-on-Chip...
  • Qualcomm Snapdragon 660 (SDA660)
  • Primary processor type -- ARM v8
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 8
  • Primary processor clock rate (GHz) -- 2.2
Additional processors (if any)...
  • GPU (graphics) -- Adreno 512
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 3
  • Type -- LPDDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 32.0
  • Type -- eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface ype -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 2
  • USB host types -- USB 3.1 + USB-HS
  • USB OTG ports -- 0
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1024
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11n/ac 2.4GHz/5GHz
  • Bluetooth -- BT/LE 5.x
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- V1.3a
  • Max. HDMI resolution -- 1080p
  • FPS at max. resolution -- 60
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 1x 1x 4-lane MIPI-DSI with FullHD+
Camera interfaces...
  • Number of camera ports -- 2
  • Camera interface types -- up to 3x 4-lane MIPI-CSI
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- n/a
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 0
  • ADC -- 0
  • PWM -- 0
  • SPI -- 1
  • I2C -- 1
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support -- yes
Operating system support...
  • Linux -- yes
  • Android -- Android 8+ BSP
  • Windows --
  • Other OSes --
Other features not listed elsewhere:
  • H.265 (HEVC) / H.264 (AVC)/VP9 playback and capture @4K30
  • Expansion I/O connector for UART, I2C, SPI, GPIOs
  • USB3.1-based GbE with PoE support
  • 802.11n/ac 2.4GHz/5GHz WiFi
  • BT/LE 5.x
  • GPS/GLONASS
Physical specs...
  • Width (mm) -- 100
  • Height (mm) -- 72
  • Depth (mm) -- 0
  • Weight (gm) --
  • Input voltage, min. (V) -- 12
  • Input voltage, max. (V) -- 12
  • Input current, min. (A) -- 3
  • Input current, max. (A) -- 3
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 70
  • Certifications -- RoHS, WEEE
Further information...
[board ID = 316]

Share your impressions of this board with the HackerBoards community...