
Product overview...
- Board Name: Intel Galileo (Gen 2)
- Category: SBC
- Model:
- Manufacturer: Intel
- Official website: click here
- Price (USD): $75
- Additional info may be found via this automated Google search
- Posted 2017-01-01 12:00am
- Intel Quark X1000
- Primary processor type: Pentium (P54C/i586)
- Primary processor word-width: 32-bit
- Primary processor cores: 1
- Primary processor clock rate (GHz): 0.4
- GPU (graphics):
- MCU (microcontroller):
- FPGA (gates):
- Other (DSP, FPU, NPU, TPU, AI...):
- Maximum capacity (GB): 0
- Type: DDR3
- ECC support: No
- Factory installed? No
- Maximum capacity (GB):
- Type:
- Factory installed? Yes
- Interface type: Other format (up to 32GB)
- m.2 interfaces: 0
- m.2 NVMe support:
- SATA ports: 0
- USB host ports: 1
- USB OTG ports: 1
- USB port types: 2
- Ethernet interfaces: 1
- Maximum LAN speed (Mbps): 100
- Wake-on-LAN support?
- WiFi:
- Bluetooth:
- Broadband:
- LoRa:
- Number of HDMI ports: 0
- HDMI version:
- Max. HDMI resolution:
- FPS at max. resolution:
- Composite video (CVBS) ports: 0
- Other display interfaces (DSI, LVDS, VGA...):
- Number of camera ports: 0
- Camera interface types:
- Analog audio out: 0
- Audio connector type:
- Audio via HDMI? 0
- I2S interfaces: 0
- SPDIF interfaces: 0
- Line inputs: 0
- Mic inputs: 0
- On-board microphones: 0
- GPIO: 14
- ADC: 6
- PWM: 6
- SPI: 1
- I2C: 1
- UARTs: 2
- RS232 (or 485 or 422): 1
- IR receiver: No
- Arduino compatible: Yes
- Raspberry Pi compatible: No
- Real time clock (RTC) support: yes
- PMIC/PMU (power management controllers):
- Lithium battery support: yes
- Linux: yes
- Android:
- Windows: supported
- Other OSes:
Arduino Compatible: Uno R3 / Arduino 1.0 pinout (both 3.3V or 5V Shield Support); RAM: 256MByte DDR3; 512KByte embedded SRAM; Flash Storage: 8MByte NOR Flash; 8Kbit EEPROM; LAN: 10/100Mbps Ethernet (RJ-45 connector) with support for Power-over-Ethernet (PoE); PCI-E: Mini-PCI Express 1x Slot; JTAG: 10-pin connector; NOR Flash: 7-pin connector for ext. programmer; RTC Battery: 2-pin header; Input (DC): Power Adapter (7V – 15VDC); Development System: Arduino IDE customized for Galileo
Physical specs...- Width (mm): 124
- Height (mm): 72
- Depth (mm): 17
- Weight (gm): 56
- Input voltage, min. (V): 7
- Input voltage, max. (V): 15
- Input current, min. (A): 0.9
- Input current, max. (A): 2.1
- Operating temp., min. (°C):
- Operating temp., max. (°C):
- Certifications:
(board ID = 77)