iW-RainboW-G27M

The iW-RainboW-G27M "SMARC" COM is based on an NXP i.MX8 QuadMax SoC, and features 6GB RAM, 16GB flash, 1080p video, dual-GbE, WiFi/BT, SATA, and more.


(click image to enlarge)

Product overview...
  • Board Name:   iW-RainboW-G27M
  • Category:   module
  • Model:  
  • Manufacturer:   iWave Systems
  • Official website:   click here
  • Price (USD):  
  • Additional info may be found via this automated Google search
  • Posted 2019-02-27 12:00am
System-on-Chip...
  • NXP i.MX8 QuadMax
  • Primary processor type:   2x 1.8GHz ARM Cortex-A72 + 4x 1.2GHz ARM Cortex-A53
  • Primary processor word-width:   64-bit
  • Primary processor cores:   6
  • Primary processor clock rate (GHz):   1.8
Additional processors (if any)...
  • GPU (graphics):   GC7000
  • MCU (microcontroller):   2x 266MHz ARM Cortex-M4F
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   6
  • Type:   LPDDR4
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   16
  • Type:   eMMC
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   microSD (up to 32GB)
  • m.2 interfaces:   0
  • m.2 NVMe support:  
SATA support...
  • SATA ports:   1
USB ports...
  • USB host ports:   4
  • USB OTG ports:   1
  • USB port types:   2
Ethernet...
  • Ethernet interfaces:   2
  • Maximum LAN speed (Mbps):   1000
  • Wake-on-LAN support?  
Wireless...
  • WiFi:   dual-band 802.11ac 2x2 MU-MIMO
  • Bluetooth:   v5
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:   1
  • HDMI version:   HDMI/DP
  • Max. HDMI resolution:   4k
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:   0
  • Other display interfaces (DSI, LVDS, VGA...):  
Camera interfaces...
  • Number of camera ports:   0
  • Camera interface types:  
Audio I/O...
  • Analog audio out:   1
  • Audio connector type:  
  • Audio via HDMI?   1
  • I2S interfaces:   1
  • SPDIF interfaces:   1
  • Line inputs:   0
  • Mic inputs:   0
  • On-board microphones:   0
Other I/O...
  • GPIO:   12
  • ADC:   0
  • PWM:   0
  • SPI:   1
  • I2C:   2
  • UARTs:   4
  • RS232 (or 485 or 422):   0
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:  
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:   Yocto 4.9.51
  • Android:   Android 8.1.0
  • Windows:  
  • Other OSes:  
Other features not listed elsewhere...

SMARC edge connector I/O:
* 2x Gigabit Ethernet
* 2x USB3.0 Host
* 1x PCIe x 1
* 1x SATA
* 1x USB 2.0 OTG
* 4x USB 2.0 Host
* 1x SD interface (4-bit)
* 2x LVDS/MIPI-DSI channels
* 1x HDMI/DP transmitter
* 1x SSI/I2S (audio interface)
* 1x debug UART
* 2x data UART (with RTS/CTS)
* 1x data UART (without RTS/CTS)
* 2x CAN
* 1x QSPI
* 1x SPI
* 2x I2C
* 12x GPIO
Expansion connector I/O:
* 1x HDMI RX
* 2x LVDS channels
* 1x MLB port
* 1x CAN
* 1x SPDIF
* 1x ESAI port
* GPIO
* Optional 256MB QSPI flash

Physical specs...
  • Width (mm):   82
  • Height (mm):   50
  • Depth (mm):   0
  • Weight (gm):  
  • Input voltage, min. (V):   5
  • Input voltage, max. (V):   5
  • Input current, min. (A):   0
  • Input current, max. (A):   0
  • Operating temp., min. (°C):   -40
  • Operating temp., max. (°C):   80
  • Certifications:   REACH, RoHS

Print Friendly, PDF & Email

[board ID = 327]

Share your impressions of this board with the HackerBoards community...