iW-Rainbow-G27S

A Pico-ITX form-factor SBC based on NXP’s i.MX8 Max/Quad SoC, along with up to 8GB RAM and 16GB eMMC. I/O includes multiple display, GbE, USB, CSI, and various other I/O ports, WiFi and BT wireless, and microSD and M.2 expansion.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX8 Quad MAX/Quad Plus
  • Primary processor type -- A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.2
Additional processors (if any)...
  • GPU (graphics) -- GC7000XSVX
  • MCU (microcontroller) -- M4
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) -- Tensilica® HiFi 4 DSP
System RAM...
  • Maximum capacity (GB) -- 4
  • Type -- LPDDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 16.0
  • Type -- eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 1
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 1
USB ports...
  • USB hosts -- 3
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- IEEE 802.11 a/b/g/n/ac Wi-Fi
  • Bluetooth -- BT 5.0
  • Broadband -- throgh M.2
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 2
  • Max. HDMI resolution -- 4k
  • FPS at max. resolution -- 60
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- MIPI DSI, LVDS,eDP
Camera interfaces...
  • Number of camera ports -- 2
  • Camera interface types -- MIPI CSI
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- 3.5mm jack
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 1
  • Line inputs -- 0
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 15
  • ADC -- 0
  • PWM -- 4
  • SPI -- 2
  • I2C -- 3
  • UARTs -- 4
  • RS232 (or 485 or 422) -- 1
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) -- PF8100
  • Lithium battery support --
Operating system support...
  • Linux -- Linux 4.14.98
  • Android -- Android Pie 9.0.0
  • Windows --
  • Other OSes -- QNX 7.0.0
Other features not listed elsewhere:

* HDMI input through micro HDMI (Type D) connector
* CAN x 1
* Debug UART connector
* JTAG Header (optional)
* TAMPER header (optional)
* RTC battery connector
* 3x 60-pin expansion connectors

Physical specs...
  • Width (mm) -- 100
  • Height (mm) -- 72
  • Depth (mm) --
  • Weight (gm) --
  • Input voltage, min. (V) -- 7
  • Input voltage, max. (V) -- 12
  • Input current, min. (A) -- 1.5
  • Input current, max. (A) -- 2
  • Operating temp., min. (°C) -- -40
  • Operating temp., max. (°C) -- 85
  • Certifications -- (none listed)
Further information...
[board ID = 428]

Share your impressions of this board with the HackerBoards community...