Jetson TX2 NX

The Jetson TX2 NX module, based on Nvidia’s 2GHz hexacore Tegra x2 SoC, offers up to 2.5 times the performance of the Jetson Nano module, and is form-factor and pin compatible with both the Jetson Nano and Xavier NX modules.

(188 views)

(click image to enlarge)

Product overview...
  • Board Name:   Jetson TX2 NX
  • Category:   module
  • Model:  
  • Manufacturer:   Nvidia
  • Official website:   click here
  • Price (USD):   $199
  • Additional info may be found via this automated Google search
  • NEW: Compare this board to others here
  • Posted 2021-03-04 2:26pm
System-on-Chip...
  • Nvidia Tegra X2
  • Primary processor type:   Nvidia Denver 2 + Arm Cortex-A57 MPCore
  • Primary processor word-width:   64-bit
  • Primary processor cores:   6
  • Primary processor clock rate (GHz):   2
Additional processors (if any)...
  • GPU (graphics):   Nvidia Pascal GPU (256x CUDA cores @1.3GHz)
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   4
  • Type:   LPDDR4
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   16
  • Type:   eMMC 5.1
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   SDIO interface (on edge connector)
  • m.2 interfaces:  
  • m.2 NVMe support:  
SATA support...
  • SATA ports:  
USB ports...
  • USB host ports:   4
  • USB OTG ports:  
  • USB port types:   1x USB 3.1; 3x USB 2.0
Ethernet...
  • Ethernet interfaces:   1
  • Maximum LAN speed (Mbps):   1000
  • Wake-on-LAN support?  
Wireless...
  • WiFi:  
  • Bluetooth:  
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:   2
  • HDMI version:   2.0
  • Max. HDMI resolution:   4k
  • FPS at max. resolution:   60
Other display interfaces...
  • Composite video (CVBS) ports:  
  • Other display interfaces (DSI, LVDS, VGA...):   see "other features section"
Camera interfaces...
  • Number of camera ports:   5
  • Camera interface types:   1x MIPI CSI (12-lane; supports 5x cameras)
Audio I/O...
  • Analog audio out:  
  • Audio connector type:  
  • Audio via HDMI?   yes
  • I2S interfaces:  
  • SPDIF interfaces:  
  • Line inputs:  
  • Mic inputs:  
  • On-board microphones:  
Other I/O...
  • GPIO:  
  • ADC:  
  • PWM:  
  • SPI:   2
  • I2C:   4
  • UARTs:   3
  • RS232 (or 485 or 422):  
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:  
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:   Ubuntu, ROS
  • Android:  
  • Windows:  
  • Other OSes:  
Other features not listed elsewhere...

* 2x PCIe Gen 2 interfaces — x1 and x2
* CSI camera port supports up to 5 cameras (via 12 virtual channels) — 12-lane MIPI CSI-2; D-PHY 1.2 (up to 30bps)
* 2x multi-mode display port supports: 2-lane DP 1.2 (1.5Gbps/lane) OR 2x eDP 1.4 OR 2x HDMI 2.0
* Other I/O: 1x SDIO, 2x SPI, 3x UART, 4x I2S, 4x I2C, 1x CAN, multiple GPIOs, 2x PCIe Gen 2 lanes (x1, x2)
* 260-pin SODIMM edge connector carries all signals and power
* Form-factor and pin-compatible with Jetson Nano and Jetson Xavier NX

Physical specs...
  • Width (mm):   70
  • Height (mm):   45
  • Depth (mm):  
  • Weight (gm):  
  • Input voltage, min. (V):   5
  • Input voltage, max. (V):  
  • Input current, min. (A):   1.5
  • Input current, max. (A):   3
  • Operating temp., min. (°C):  
  • Operating temp., max. (°C):  
  • Certifications:  

Print Friendly, PDF & Email

(board ID = 527)

Share your impressions of this board with the HackerBoards community...