Khadas VIM3L

The VIM3L SBC, based on Amlogic’s 1.9GHz quad-core S905D3 SoC, is a lower-cost, lower-power variant of the VIM3, featuring up to 2GB RAM and 16GB eMMC, TF slot, HDMI, MIPI-DSI, touch-panel interface, WiFi, BT, GbE, USB, ADC, accelerometer, 40-pin expansion, and more.


(click image for a larger view)


Overview...
  • Board Name -- Khadas VIM3L
  • Category -- SBC
  • Model (if known) --
  • Manufacturer -- Khadas
  • Official website -- https://www.khadas.com/vim3l
  • Price (if known) -- $75 (USD)
  • Additional info may be found via this automated Google search
  • Dated posted -- Sep. 16, 2019 1:51pm
System-on-Chip...
  • Amlogic S905D3
  • Primary processor type -- ARM Cortex-A55
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.9
Additional processors (if any)...
  • GPU (graphics) -- ARM Mali-G31 MP2
  • MCU (microcontroller) -- 1x Cortex-M4 + 1x Cortex-M3
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 2
  • Type -- LPDDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 16.0
  • Type -- eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- Other format, via pin header, etc.
  • m.2 interfaces -- 1
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 2
  • USB host types -- 1x 3.0 + 1x 2.0
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11a/b/g/n/ac 2X2 MIMO with RSDB
  • Bluetooth -- 5
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 2.1
  • Max. HDMI resolution -- 4k
  • FPS at max. resolution -- 60
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- MIPI-DSI (4-lane), up to 1080p
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- MIPI-CSI (2-lane)
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- n/a
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 1
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 40
  • ADC -- 1
  • PWM -- 1
  • SPI -- 0
  • I2C -- 1
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- Yes
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) -- STM8S003 with programmable EEPROM
  • Lithium battery support --
Operating system support...
  • Linux -- LibreELEC (Linux 5.0+), CoreELEC (Linux 4.9)
  • Android -- Android 9.0 (Pie)
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* 40-pin expansion bus with USB, I2C, I2S, SPDIF, UART, PWM, ADC, and more
* M.2 socket supports M.2 2280 NVMe SSD, PCIe x1, and USB3.0
* H/W UHD 4K H.265 75fps 10-bit video decoder & low latency 1080p H.265/H.264 60fps decoder
* Multi-video decoding up to [email protected] + [email protected]
* Dolby Vision and HDR10, HDR10+, HLG and PRIME HDR video processing
* 3-axis accelerometer
* 3x LEDs + 3x buttons
* Optional M2X Extension Board includes an M.2 slot for 2280 NVMe SSD, a 4G module (with SIM slot), 100Mbps Ethernet with PoE, and an extra USB-C port for supplying PoE power

Physical specs...
  • Width (mm) -- 82
  • Height (mm) -- 58
  • Depth (mm) -- 12
  • Weight (gm) -- 29
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 12
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications -- CE, ROHS
Further information...
[board ID = 376]

Share your impressions of this board with the HackerBoards community...