LicheePi Nano

Aug. 17, 2018 5:01am – The LicheePi Nano SBC from Zepan is based on a 1-core 32-bit AllWinner F1C100s backed by up to 0GB RAM.

(click image for a larger view)


Board description:
Overview... System-on-Chip...
  • AllWinner F1C100s
  • Primary processor type -- ARM926EJS
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 1
  • Primary processor clock rate (GHz) -- 0.9
Additional processors (if any)...
  • GPU (graphics) --
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 0
  • Type -- DDR
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.0
  • Type -- optional SPI
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface ype -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 0
  • USB host types -- 2.0 OTG
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 0
  • Maximum LAN speed (Mbps) --
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- optional via SDIO
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 1
  • Other display interfaces (DSI, LVDS, VGA...) -- RGB LCD 40-pin FPC (272x480, 480x800, 1024x600...)
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- CSI + 2x CVBS input
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- Other format, via pin header, etc.
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 20
  • ADC -- 1
  • PWM -- 2
  • SPI -- 2
  • I2C -- 3
  • UARTs -- 3
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support -- 3.7V input yes (no recharge IC)
Operating system support...
  • Linux -- yes
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

2x TV (CVBS) input, 1x output
Full HD Video Engine(H.264,H.263,JPEG/MJPEG,etc.)
Audio: Speaker x2, Mic x1
On-board resistive touch screen chip supporting resistive screen
Availability: appears to be offered at Banggood.com

Physical specs...
  • Width (mm) -- 33
  • Height (mm) -- 25
  • Depth (mm) -- 4
  • Weight (gm) --
  • Input voltage, min. (V) -- 3.3
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 0.1
  • Input current, max. (A) -- 0.3
  • Operating temp., min. (°C) -- -20
  • Operating temp., max. (°C) -- 70
  • Certifications -- (none listed)
Further information...
[board ID = 276]

Share your impressions of this board with the HackerBoards community...