MIO-2263

Jan. 1, 2017 12:00am – The MIO-2263 SBC from Advantech is based on a 4-core 32-bit Intel Atom E3825 or Celeron J1900 backed by up to 8GB RAM.

(click image for a larger view)


Board description:
Overview... System-on-Chip...
  • Intel Atom E3825 or Celeron J1900
  • Primary processor type -- Intel Atom / Celeron
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 2.42
Additional processors (if any)...
  • GPU (graphics) -- Intel HD Graphics 7
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 8
  • Type -- DDR3L
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) --
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface ype -- none
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 2
USB ports...
  • USB hosts -- 4
  • USB host types -- (3x 2.0, 1x 3.0)
  • USB OTG ports -- 0
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- Optional
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- VGA, LVDS
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- 3.5mm jack
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- -1
  • ADC -- 1
  • PWM -- 1
  • SPI -- 0
  • I2C -- 0
  • UARTs -- 0
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android -- Android 4.4
  • Windows -- Windows 7, 8, 10
  • Other OSes --
Other features not listed elsewhere:

SATA + mSATA (via mini-PCIe slot), up to 8GB DDR3L-1066/1333 RAM via 204-pin SODIMM, Single-channel 24-bit LVDS at up to 1440 x 900 pixels, Dual display support, VGA (up to 2560 x 1600; can be swapped out for HDMI on Celeron model), RS-232 + RS-232/422/485 with auto flow control, HD audio interfaces, 8-bit GPIO, MIOe expansion (2x USB 2.0, 2x PCIe x1, DisplayPort/HDMI, line-out, LPC, SMBus, +5/+12 power, reset), watchdog

Physical specs...
  • Width (mm) -- 100
  • Height (mm) -- 72
  • Depth (mm) -- 34
  • Weight (gm) --
  • Input voltage, min. (V) -- 1.1
  • Input voltage, max. (V) -- 1.3
  • Input current, min. (A) -- 0.6
  • Input current, max. (A) -- 0.9
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications -- (none listed)
Further information...
[board ID = 56]

Share your impressions of this board with the HackerBoards community...