MITX-6770


(click image for a larger view)


Overview... System-on-Chip...
  • Intel Celeron J1900
  • Primary processor type -- Intel Celeron
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 2.42
Additional processors (if any)...
  • GPU (graphics) -- Intel HD Graphics
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 8
  • Type -- DDR3L
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) --
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- none
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 2
USB ports...
  • USB hosts -- 4
  • USB host types -- (3x 2.0, 1x 3.0)
  • USB OTG ports -- 0
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- VGA
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- 3.5mm jack
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 0
  • ADC -- 0
  • PWM -- 0
  • SPI -- 0
  • I2C -- 0
  • UARTs -- 0
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android -- Android 4.4
  • Windows -- Windows 7, 8, 10
  • Other OSes --
Other features not listed elsewhere:
  • Form Factor: mini-ITX
  • BIOS: AMI
  • System memory: 2x 204-Pin DDR3L SO-DIMM, up to 4GB each
  • 2x RJ45 GbE (Intel I210/I211)
  • LAN1 has pin-header for optional POE module
  • 2x SATA 3Gb/s or 2x mSATA (1x full-size + 1x half-size mini-PCIe), jumper selectable
  • 1x half-size mini-PCIe + USB/mSATA
  • 1x full size mini-PCIe x1 slot for USB or mSATA only
  • 1x PCIe x1 slot
  • 12V DC 2.5mm power jack
  • 1x dual/single channel 18/24-bit LVDS via optional add-on card (dual independent display)
  • 2x RS-232 headers
  • Physical specs...
    • Width (mm) -- 170
    • Height (mm) -- 170
    • Depth (mm) -- 35
    • Weight (gm) --
    • Input voltage, min. (V) -- 12
    • Input voltage, max. (V) -- 12
    • Input current, min. (A) -- 2.5
    • Input current, max. (A) -- 4
    • Operating temp., min. (°C) --
    • Operating temp., max. (°C) --
    • Certifications -- (none listed)
    Further information...
    [board ID = 55]

    Share your impressions of this board with the HackerBoards community...