
Product overview...
- Board Name: MYC-Y7Z010/007S
- Category: module
- Model:
- Manufacturer: MYIR Tech
- Official website: click here
- Price (USD): $85
- Additional info may be found via this automated Google search
- Posted 2019-05-16 12:00am
- Xilinx Zynq-7010 (866MHz dual-core) or Zynq-7007S (766MHz single-core)
- Primary processor type: ARM Cortex-A9 MPcore
- Primary processor word-width: 32-bit
- Primary processor cores: 2
- Primary processor clock rate (GHz): 0.87
- GPU (graphics):
- MCU (microcontroller):
- FPGA (gates): Artix-7
- Other (DSP, FPU, NPU, TPU, AI...):
- Maximum capacity (GB): 1
- Type: DDR3
- ECC support: No
- Factory installed? Yes
- Maximum capacity (GB): 4
- Type: eMMC
- Factory installed? Yes
- Interface type: Other format (up to 32GB)
- m.2 interfaces: 0
- m.2 NVMe support:
- SATA ports: 0
- USB host ports: 1
- USB OTG ports: 0
- USB port types:
- Ethernet interfaces: 1
- Maximum LAN speed (Mbps): 1000
- Wake-on-LAN support?
- WiFi:
- Bluetooth:
- Broadband:
- LoRa:
- Number of HDMI ports: 0
- HDMI version:
- Max. HDMI resolution:
- FPS at max. resolution:
- Composite video (CVBS) ports: 0
- Other display interfaces (DSI, LVDS, VGA...):
- Number of camera ports: 0
- Camera interface types:
- Analog audio out: 0
- Audio connector type:
- Audio via HDMI? 0
- I2S interfaces: 0
- SPDIF interfaces: 0
- Line inputs: 0
- Mic inputs: 0
- On-board microphones: 0
- GPIO: 0
- ADC: 2
- PWM: 0
- SPI: 2
- I2C: 2
- UARTs: 2
- RS232 (or 485 or 422): 0
- IR receiver: No
- Arduino compatible: No
- Raspberry Pi compatible: No
- Real time clock (RTC) support:
- PMIC/PMU (power management controllers):
- Lithium battery support:
- Linux: Linux 3.15.0
- Android:
- Windows:
- Other OSes:
* Choice of two Xilinx SoCs: XC7Z010-1CLG400I (Zynq-7010; 667MHz dual-core) or XC7Z007S-1CLG400I (Zynq-7007S; 766MHz single-core)
* The Xilinx Zynq-7000 SoC includes an integrated Artix-7 class FPGA with 28K logic cells (Zynq-7010) or 23K logic cells (Zynq-7007S)
* The module also has 16MB QSPI on-board flash
* The module’s baseboard mounting and signal interface is via a 180-pin, 1.27mm "stamp hole" (aka "castellated hole") interface"
* Option: MY-EVC5100MbpsS-HMI display panel
* The MYC-Y7Z010/007S is also offered preinstalled as part of the MYD-Y7Z010/007S development board
- Width (mm): 75
- Height (mm): 50
- Depth (mm): 0
- Weight (gm):
- Input voltage, min. (V): 5
- Input voltage, max. (V): 5
- Input current, min. (A): 0
- Input current, max. (A): 0
- Operating temp., min. (°C): -40
- Operating temp., max. (°C): 85
- Certifications:
(board ID = 352)