MYD-Y6ULX

The MYD-Y6ULX development board integrates MYIR’s NXP i.MX6UL/ULL-based MYC-Y6ULX SoM. The baseboard provides connectors and headers for a wide range of interface signals, including serial, USB, Ethernet, CAN, MicroSD, WiFi module, LCD, camera, audio, and GPIO, plus support for USB-based 4G LTE modules.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX 6UL/6ULL
  • Primary processor type -- ARM Cortex-A7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 1
  • Primary processor clock rate (GHz) -- 0.53
Additional processors (if any)...
  • GPU (graphics) --
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 0
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.3
  • Type -- 256MB NAND; 4GB eMMC (option)
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 2
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 100
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- Optional WiFI module
  • Bluetooth --
  • Broadband -- Optional LTE module
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 24-bit parallel LCD
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- 24-bit CSI
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- Other format, via pin header, etc.
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 1
  • Line inputs -- 1
  • Mic inputs -- 0
  • On-board microphones -- 1
Other I/O...
  • GPIO -- 10
  • ADC -- 0
  • PWM -- 0
  • SPI -- 1
  • I2C -- 1
  • UARTs -- 3
  • RS232 (or 485 or 422) -- 2
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- Linux 4.1.15
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* Integrates MYC-Y6ULX SoM, with choice of 528MHz or 696MHz NXP i.MX 6UL/ULL SoCs
* Other I/O (depending on model) includes 1x or 2x CAN, 1x RS232, 1x RS485, TF, 24-bit parallel LCD, 24-bit parallel CSI, audio, 2x SDIO, 1x quad SPI, 4x or 8x UART, 2x or 4x I2C, 2x or 4x SPI, 1x or 3x I2S/SAI, 1x SPDIF, 1x or 2x 10-channel ADC, 10x GPIO
* SDIO-based WiFi module with external antennas
* Optional WiFi module
* 20-pin I/O expansion header
* on-board connectors for 2x Ethernet, RS485/CAN/RS232, LCD, audio in/out, microUSB OTG, 12VDC, debug UART, USB host, microSD card, camera, LTE module, SIM card, RTC battery holder, optional WiFi header, and WiFi and LTE antennas
* 2x LEDs, 3x buttons
* Optional 4.3- or 7-inch LCD/TSP and camera module
* Optional -40 – 85°C operating temp.

Physical specs...
  • Width (mm) -- 140
  • Height (mm) -- 105
  • Depth (mm) -- 0
  • Weight (gm) --
  • Input voltage, min. (V) -- 12
  • Input voltage, max. (V) -- 12
  • Input current, min. (A) -- 18
  • Input current, max. (A) -- 18
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 70
  • Certifications -- (none listed)
Further information...
[board ID = 334]

Share your impressions of this board with the HackerBoards community...