Myon I

The Myon I is the first in a family of “Myon SOM” modules. It’s based on the 64-bit Snapdragon 410E SoC and includes up to 8GB LPDDR3 and 1GB eMMC, plus LVDS, MIPI CSI/DSI, USB, audio in/out, and numerous software-configurable GPIOs, as well as on-board WiFi, BT, and GPS.


(click image for a larger view)


Overview... System-on-Chip...
  • Qualcomm Snapdragon 410E
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.2
Additional processors (if any)...
  • GPU (graphics) -- Qualcomm Adreno 306
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 8
  • Type -- LPDDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 1.0
  • Type -- eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- Other format, via pin header, etc.
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 0
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 0
  • Maximum LAN speed (Mbps) --
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11 a/b/g/n 2.4GHz
  • Bluetooth -- 4.1
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 1x LVDS or 1x 4-channel MIPI-DSI
Camera interfaces...
  • Number of camera ports -- 2
  • Camera interface types -- 1x 2-channel MIPI-CSI, 1x 4-channel MIPI-CSI
Audio I/O...
  • Analog output ports -- 3
  • Audio connector type -- Other format, via pin header, etc.
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 3
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 8
  • ADC -- 0
  • PWM -- 0
  • SPI -- 6
  • I2C -- 6
  • UARTs -- 2
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support -- yes
Operating system support...
  • Linux -- Linux
  • Android -- Android
  • Windows -- Windows 10 IoT Core
  • Other OSes --
Other features not listed elsewhere:

* I/O via 2x 100-pin high-density connectors, with many pin functions software configurable
* 8-pin JTAG connector
* Optional wireless antenna add-on board
* Optional CON XM baseboard
* Optional i-PAN M7 touch panel

Physical specs...
  • Width (mm) -- 48
  • Height (mm) -- 32
  • Depth (mm) -- 4
  • Weight (gm) --
  • Input voltage, min. (V) -- 4.4
  • Input voltage, max. (V) -- 6.2
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) -- -25
  • Operating temp., max. (°C) -- 85
  • Certifications -- RoHS, REACH, WEEE
Further information...
[board ID = 369]

Share your impressions of this board with the HackerBoards community...