MYS-6ULX

Measuring only 70mm by 55mm, the MYS-6ULX is a high-performance low-cost Single Board Computer specially designed for Industry 4.0 and Internet of Things (IoT) applications. It is based on NXP’s i.MX 6UltraLite / 6ULL processor family which features the most efficient ARM Cortex-A7 core and can operate at 528 MHz. It has two 2.0mm pitch 2×20-pin headers on board to allow extension of the controller signals and ports to the base board through headers and connectors, thus exposing more features of the i.MX 6UL / 6ULL ARM Cortex-A7 Processors, so it can also be used as a System-on-Module (SoM) for your next embedded design.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX 6UL/6ULL
  • Primary processor type -- ARM Cortex-A7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 1
  • Primary processor clock rate (GHz) -- 0.53
Additional processors (if any)...
  • GPU (graphics) --
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 0
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- No
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.3
  • Type -- NAND flash, up to 256MB
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 1
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 100
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11 b/g/n
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- RGB LCD
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- n/a
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 46
  • ADC -- 8
  • PWM -- 4
  • SPI -- 4
  • I2C -- 4
  • UARTs -- 8
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:
Physical specs...
  • Width (mm) -- 70
  • Height (mm) -- 55
  • Depth (mm) --
  • Weight (gm) -- 40
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) -- -40
  • Operating temp., max. (°C) -- 85
  • Certifications -- RoHS
Further information...
[board ID = 287]

Share your impressions of this board with the HackerBoards community...