(click image for a larger view)
Overview...
- Board Name -- NanoPi A64
- Category -- SBC
- Model (if known) --
- Manufacturer -- FriendlyElec
- Official website -- http://nanopi.io/nanopi-a64.html
- Price (if known) -- $25 (USD)
- Additional info may be found via this automated Google search
- Dated posted -- Jan. 1, 2017 12:00am
- AllWinner A64
- Primary processor type -- ARM Cortex-A53
- Primary processor word-width -- 64-bit
- Primary processor cores -- 4
- Primary processor clock rate (GHz) -- 1.15
- GPU (graphics) -- Mali-400 MP2
- MCU (microcontroller) --
- FPGA (gates) --
- Other (DSP, FPU, NPU, TPU, AI...) --
- Maximum capacity (GB) -- 1
- Type -- DDR3
- ECC support -- No
- Factory installed? -- Yes
- Maximum capacity (GB) --
- Type --
- Factory installed? -- Yes
- Interface type -- microSD
- m.2 interfaces -- 0
- m.2 NVMe support --
- SATA ports -- 0
- USB hosts -- 2
- USB host types -- 2
- USB OTG ports -- 0
- Ethernet interfaces -- 1
- Maximum LAN speed (Mbps) -- 1000
- Wake-on-LAN support? --
- WiFi -- 802.11 b/g/n
- Bluetooth --
- Broadband --
- LoRa --
- Number of HDMI ports -- 1
- HDMI version --
- Max. HDMI resolution --
- FPS at max. resolution --
- HDMI audio support? -- Yes
- Composite video (CVBS) ports -- 0
- Other display interfaces (DSI, LVDS, VGA...) -- MIPI DSI
- Number of camera ports -- 1
- Camera interface types -- DVP
- Analog output ports -- 1
- Audio connector type -- 3.5mm jack
- Audio via HDMI? -- Yes
- SPDIF interfaces -- 1
- Line inputs -- 0
- Mic inputs -- 1
- On-board microphones -- 0
- GPIO -- 40
- ADC -- 0
- PWM -- 1
- SPI -- 2
- I2C -- 3
- UARTs -- 3
- RS232 (or 485 or 422) -- 0
- IR receiver -- Yes
- Arduino compatible -- No
- Raspberry Pi compatible -- Yes
- Real time clock (RTC) support --
- PMIC/PMU (power management controllers) --
- Lithium battery support --
- Linux -- yes
- Android -- Unofficial
- Windows --
- Other OSes --
PMU: AXP803, supports software power-off
Serial Debug Port: 2.54mm pitch 4pin-header
DVP Camera: 0.5mm pitch 24pin FPC seat
MIPI DSI: 0.5mm pitch 30pin FPC seat
GPIO: 2.54mm pitch 40pin-header, compatible with Raspberry Pi.
I2S: 7pin, 2.54mm pitch
LED: Power Indication x 1, System LED x 1
- Width (mm) -- 64
- Height (mm) -- 60
- Depth (mm) -- 13
- Weight (gm) --
- Input voltage, min. (V) -- 5
- Input voltage, max. (V) -- 5
- Input current, min. (A) -- 1
- Input current, max. (A) -- 2
- Operating temp., min. (°C) --
- Operating temp., max. (°C) --
- Certifications -- (none listed)
- Official website -- http://nanopi.io/nanopi-a64.html
- Additional info on the web -- automated Google search...