(click image for a larger view)
Board description:
NanoPi Duo is a truly tiny (50 x 25mm, 7g), low-cost computer-on-module, powered by an AllWinner H2+ SoC (4x ARM Cortex-A7), and featuring a breadboard-friendly design. It includes 256/512MB RAM, 10/100 Ethernet, WiFi and 32 GPIO pins, and supports mainline Linux 4.11.
- Board Name -- NanoPi Duo
- Category -- module
- Model (if known) --
- Manufacturer: FriendlyElec
- Official website -- http://www.friendlyarm.com/index.php?route=product/product&product_id=197
- Price (if known) -- $8 (USD)
- Additional info may be found via this automated Google search
- AllWinner H2+
- Primary processor type -- ARM Cortex-A7
- Primary processor word-width -- 32-bit
- Primary processor cores -- 4
- Primary processor clock rate (GHz) -- 1.2
- GPU (graphics) -- Mali-400 MP2 600MHz
- MCU (microcontroller) --
- FPGA (gates) --
- Other (DSP, FPU, NPU, TPU, AI...) --
- Maximum capacity (GB) -- 0
- Type -- DDR3 (up to 512MB)
- ECC support -- No
- Factory installed? -- Yes
- Maximum capacity (GB) --
- Type --
- Factory installed? -- Yes
- Interface ype -- microSD
- m.2 interfaces -- 0
- m.2 NVMe support --
- SATA ports -- 0
- USB hosts -- 2
- USB host types -- 2.0 (via pin header)
- USB OTG ports -- 1
- Ethernet interfaces -- 1
- Maximum LAN speed (Mbps) -- 100
- Wake-on-LAN support? --
- WiFi -- 802.11b/g/n (Allwinner XR819)
- Bluetooth --
- Broadband --
- LoRa --
- Number of HDMI ports -- 0
- HDMI version --
- Max. HDMI resolution --
- FPS at max. resolution --
- HDMI audio support? -- No
- Composite video (CVBS) ports -- 1
- Other display interfaces (DSI, LVDS, VGA...) --
- Number of camera ports -- 0
- Camera interface types --
- Analog output ports -- 1
- Audio connector type -- Other format, via pin header, etc.
- Audio via HDMI? -- No
- SPDIF interfaces -- 0
- Line inputs -- 0
- Mic inputs -- 1
- On-board microphones -- 0
- GPIO -- 32
- ADC -- 0
- PWM -- 1
- SPI -- 1
- I2C -- 1
- UARTs -- 2
- RS232 (or 485 or 422) -- 0
- IR receiver -- Yes
- Arduino compatible -- No
- Raspberry Pi compatible -- No
- Real time clock (RTC) support --
- PMIC/PMU (power management controllers) --
- Lithium battery support --
- Linux -- yes
- Android --
- Windows --
- Other OSes --
* u.FL/IPEX connector for external antenna
* SPI flash footprint
* OS: U-boot + Linux 4.11.2 (mainline); Ubuntu 16.04.2 LTS
* Two versions of this module are available, with 256MB and with 512MB RAM (priced at $8 and $12, respectively)
- Width (mm) -- 50
- Height (mm) -- 26
- Depth (mm) -- 3
- Weight (gm) -- 7
- Input voltage, min. (V) -- 5
- Input voltage, max. (V) -- 5
- Input current, min. (A) -- 0.3
- Input current, max. (A) -- 1.2
- Operating temp., min. (°C) -- -40
- Operating temp., max. (°C) -- 80
- Certifications -- (none listed)
- Official website -- http://www.friendlyarm.com/index.php?route=product/product&product_id=197
- Additional info on the web -- automated Google search...