NanoPi Fire3

The NanoPi Fire3 is a high performance ARM Board developed by FriendlyElec for Hobbyists, Makers and Hackers for IOT projects. It features Samsung’s Cortex-A53 Octa Core [email protected] SoC and 1GB 32bit DDR3 RAM. It has a Gbps Ethernet port. It boots Android and Debian from a TF card. It integrates an HDMI and LCD interface. Its adoption of the Raspberry Pi’s GPIO pin header makes it compatible with both Raspberry Pi’s external GPIO modules and Arduino’s shield boards. Its PCB dimension is 75 x 40 mm.

Source: wiki.friendlyarm.com


(click image for a larger view)


Overview... System-on-Chip...
  • Samsung S5P6818
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 8
  • Primary processor clock rate (GHz) -- 1.4
Additional processors (if any)...
  • GPU (graphics) -- Mali-400 MP
  • MCU (microcontroller) -- STM32F03 ARM Cortex-M0 (power management only)
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 1
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) --
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 1
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 1.4a, microHDMI (type D)
  • Max. HDMI resolution -- 1080p
  • FPS at max. resolution -- 60
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8)
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- DVP, 0.5mm spacing FPC socket. It includes ITU-R BT 601/656 8-bit, I2C, PWM and IO
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- n/a
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 40
  • ADC -- 0
  • PWM -- 3
  • SPI -- 1
  • I2C -- 2
  • UARTs -- 3
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- Yes
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android -- Android 5.1.1
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

PMU Power Management: Implemented by a Cortex-M0 MCU, support software power-off, and RTC alarm power-up functions
Debug Serial Port/UART0 x 1
OS: FriendlyCore(Linux Kernel 4.4 + Qt5.9 + OpenGL2.0) and Debian
Button: Power Button x 1, Reset Button x 1

Physical specs...
  • Width (mm) -- 75
  • Height (mm) -- 40
  • Depth (mm) -- 16
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 1.1
  • Input current, max. (A) -- 2
  • Operating temp., min. (°C) -- -20
  • Operating temp., max. (°C) -- 80
  • Certifications -- (none listed)
Further information...
[board ID = 210]

Share your impressions of this board with the HackerBoards community...