NanoPi NEO4

The NanoPi NEO4 is an RK3399 SoC based ARM board


(click image to enlarge)

Product overview...
  • Board Name -- NanoPi NEO4
  • Category -- SBC
  • Model --
  • Manufacturer -- FriendlyElec
  • Official website -- click here
  • Price -- $50 (USD)
  • Additional info may be found via this automated Google search
  • Posted 2018-10-25 12:00am
System-on-Chip...
  • Rockchip RK3399
  • Primary processor type -- 2x ARM Cortex-A72 + 4x ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 6
  • Primary processor clock rate (GHz) -- 1.8
Additional processors (if any)...
  • GPU (graphics) -- Mali-T864
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 1
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) --
  • Type -- eMMC
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- microSD (up to 32GB)
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB host ports -- 3
  • USB OTG ports -- 1
  • USB port types -- 2x 2.0 + 1x 3.0
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11 b/g/n
  • Bluetooth -- 4
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 2.0a
  • Max. HDMI resolution -- 4k
  • FPS at max. resolution -- 60
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type --
  • Audio via HDMI? -- 1
  • I2S interfaces -- 0
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 40
  • ADC -- 0
  • PWM -- 0
  • SPI -- 1
  • I2C -- 2
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android -- 7.1.3, 8.1
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* Through-hole solder pads for supplying power to the RTC are between the Ethernet and USB connectors
* See board details in this photo

Physical specs...
  • Width (mm) -- 60
  • Height (mm) -- 45
  • Depth (mm) -- 15
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) -- -20
  • Operating temp., max. (°C) -- 70
  • Certifications --

Print Friendly, PDF & Email

[board ID = 282]

Share your impressions of this board with the HackerBoards community...