ODROID-C4

The ODROID-C4 is based on the Amlogic S905X3 SoC, which integrates 4x Cortex-A55 cores plus a Mali-G31 MP2 GPU. The board supports 2.0 GHz operation, and features 4GB DDR4, eMMC and microSD expansion, and interfaces including GbE, HDMI, SPDIF, USB, and 40-pin expansion.


(click image to enlarge)

Product overview...
  • Board Name -- ODROID-C4
  • Category -- SBC
  • Model --
  • Manufacturer -- HardKernel
  • Official website -- click here
  • Price -- $50 (USD)
  • Additional info may be found via this automated Google search
  • Posted 2020-06-17 12:00am
System-on-Chip...
  • Amlogic S905X3
  • Primary processor type -- 4x ARM Cortex-A55
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 2
Additional processors (if any)...
  • GPU (graphics) -- Mali G31 MP2
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 4
  • Type -- DDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) --
  • Type -- eMMC
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB host ports -- 4
  • USB OTG ports -- 1
  • USB port types -- 3
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 2
  • Max. HDMI resolution -- 4k
  • FPS at max. resolution -- 60
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- other (e.g. header pins)
  • Audio via HDMI? -- 1
  • I2S interfaces -- 1
  • SPDIF interfaces -- 1
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 25
  • ADC -- 2
  • PWM -- 6
  • SPI -- 1
  • I2C -- 2
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- Yes
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- Ubuntu 20.04, CoreELEC, LineageOS
  • Android -- Android 9, 10
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* I/O expansion via 40-pin dual-row and 7-pin single-row headers* eMMC and MicroSD sockets* RJ45 GbE port* heatsink* 2x LEDs (PWR, ALIVE)* IR receiver for remote control* 5.5mm DC jack; 12DC at 2A power adapter recommended

Physical specs...
  • Width (mm) -- 85
  • Height (mm) -- 56
  • Depth (mm) -- 20
  • Weight (gm) -- 59
  • Input voltage, min. (V) -- 5.5
  • Input voltage, max. (V) -- 15.5
  • Input current, min. (A) -- 0.2
  • Input current, max. (A) -- 5
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 75
  • Certifications --

Print Friendly, PDF & Email

[board ID = 427]

Share your impressions of this board with the HackerBoards community...