Orange Pi R1


(click image to enlarge)

Product overview...
  • Board Name -- Orange Pi R1
  • Category -- SBC
  • Model -- opi-r1
  • Manufacturer -- XunLong Software
  • Official website -- click here
  • Price -- $14 (USD)
  • Additional info may be found via this automated Google search
  • Posted 2017-08-18 12:00am
System-on-Chip...
  • AllWinner H2+
  • Primary processor type -- ARM Cortex-A7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.2
Additional processors (if any)...
  • GPU (graphics) -- Mali-400 MP2
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 0
  • Type -- DDR3
  • ECC support -- No
  • Factory installed? -- No
On-board solid-state storage...
  • Maximum capacity (GB) -- 0
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD (up to 64GB)
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB host ports -- 2
  • USB OTG ports -- 1
  • USB port types -- 2.0 (via pin header)
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 100
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11 b/g/n (RTL8189ETV)
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
Other display interfaces...
  • Composite video (CVBS) ports -- 1
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- other (e.g. header pins)
  • Audio via HDMI? -- 0
  • I2S interfaces -- 0
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 26
  • ADC -- 0
  • PWM -- 1
  • SPI -- 1
  • I2C -- 1
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- Yes
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- Yes
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android -- Android 4.4
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

Pin headers:

  • 26-pin Raspberry Pi-compatible pin header:
  • 13-pin header:
    • headphone analog audio output + mic input
    • 2x USB 2.0 host
    • CVBS TV analog video output
    • IR receiver
  • 3-pin serial console header

Ethernet: 2x 10/100Mbps (one native, one via RTL8152B USB/Ethernet adapter)
Antenna: u.FL antenna connector (for Wi-Fi)

Physical specs...
  • Width (mm) -- 60
  • Height (mm) -- 45
  • Depth (mm) -- 18
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 0.7
  • Input current, max. (A) -- 1.5
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications --

Print Friendly, PDF & Email

[board ID = 193]

Share your impressions of this board with the HackerBoards community...