Orange Pi RK3399


(click image to enlarge)

Product overview...
  • Board Name:   Orange Pi RK3399
  • Category:   SBC
  • Model:  
  • Manufacturer:   XunLong Software
  • Official website:   click here
  • Price (USD):   $109
  • Additional info may be found via this automated Google search
  • Posted 2018-01-29 12:00am
System-on-Chip...
  • Rockchip RK3399
  • Primary processor type:   2x ARM Cortex-A72 + 4x ARM Cortex-A53
  • Primary processor word-width:   64-bit
  • Primary processor cores:   6
  • Primary processor clock rate (GHz):   1.8
Additional processors (if any)...
  • GPU (graphics):   Mali-T860 MP4
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   2
  • Type:   DDR3
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   16
  • Type:   eMMC
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   microSD (up to 128GB)
  • m.2 interfaces:   0
  • m.2 NVMe support:  
SATA support...
  • SATA ports:   1
USB ports...
  • USB host ports:   4
  • USB OTG ports:   1
  • USB port types:   2.0 + 3.0 Type-C
Ethernet...
  • Ethernet interfaces:   1
  • Maximum LAN speed (Mbps):   1000
  • Wake-on-LAN support?  
Wireless...
  • WiFi:   802.11ac dual band MIMO (AP6356S)
  • Bluetooth:   4.1 LE
  • Broadband:   SIM card slot (requires miniPCIe LTE module)
  • LoRa:  
HDMI...
  • Number of HDMI ports:   1
  • HDMI version:   2
  • Max. HDMI resolution:   4k
  • FPS at max. resolution:   60
Other display interfaces...
  • Composite video (CVBS) ports:   0
  • Other display interfaces (DSI, LVDS, VGA...):   2x MIPI DSI (up to 2560×1600 @ 60 Hz)
Camera interfaces...
  • Number of camera ports:   2
  • Camera interface types:   MIPI CSI, up to 13MP
Audio I/O...
  • Analog audio out:   1
  • Audio connector type:   3.5mm jack
  • Audio via HDMI?   1
  • I2S interfaces:   1
  • SPDIF interfaces:   1
  • Line inputs:   0
  • Mic inputs:   1
  • On-board microphones:   1
Other I/O...
  • GPIO:   5
  • ADC:   0
  • PWM:   0
  • SPI:   1
  • I2C:   4
  • UARTs:   2
  • RS232 (or 485 or 422):   0
  • IR receiver:   Yes
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:  
  • PMIC/PMU (power management controllers):   RK808
  • Lithium battery support:   7.4V dual Lithium battery support
Operating system support...
  • Linux:   yes
  • Android:   Android 6.0
  • Windows:  
  • Other OSes:  
Other features not listed elsewhere...

Audio/video:
– HDMI input port
– DisplayPort (DP) 1.2 interface up to 4K @ 60Hz
– eDP 1.3 (4-lanes @ 10.8 Gbps)
– 4K VP9 and 10-bit H.265 video codec support up to 60 fps
– Optical S/PDIF
– Speaker header (1.5W 8Ω or 2.5W 4Ω)
– Microphone array interface
– I2S output and input interface up to 8 channels
Onboard sensors:
– Gyroscope+G-Sensor (MPU6500)
– Gyroscope (LSM6DS3)
– HALL Sensor (HAL248TWCL)
– Light Sensor (CM32181)
– Compass (AK09911)
Power:
– 12V/2A via DC jack (5.5/2.1mm) or 2-pin header
– 5V via type C port or 2-pin header
– Dual battery support (7.4V):
– RK808 PMU
– BQ25700 Charger IC
– CW2015 Fuel Gas
– 3-pin serial header
– 1x mini PCIe for LTE (USB) or mSATA
– SIM card slot
– Buttons: reset, power, recovery, menu, return, vol+ and vol-
– OpenGL 1.1 to 3.1 support, OpenVG1.1, OpenCL and DX 11
(credits: cnx-software.com)

Physical specs...
  • Width (mm):   129
  • Height (mm):   99
  • Depth (mm):   21
  • Weight (gm):   99
  • Input voltage, min. (V):   5
  • Input voltage, max. (V):   12
  • Input current, min. (A):   2
  • Input current, max. (A):   3
  • Operating temp., min. (°C):  
  • Operating temp., max. (°C):  
  • Certifications:  

Print Friendly, PDF & Email

[board ID = 234]

Share your impressions of this board with the HackerBoards community...