PanGu Board

The PanGu Board is a compact SBC based on an STM32MP1 SoC with 2x 650MHz Cortex-A7 and 1x 209MHz Cortex-M4 ARM cores, plus a 3D GPU. It features HDMI, Ethernet, LCD, USB OTG and Host, TF Card, audio, and two expansion interfaces, and targets industrial, automotive, consumer, and IoT applications.


(click image for a larger view)


Overview... System-on-Chip...
  • STMicroelectronics STM32MP157
  • Primary processor type -- ARM Cortex-A7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 2
  • Primary processor clock rate (GHz) -- 0.65
Additional processors (if any)...
  • GPU (graphics) -- Vivante (3D GPU; supports OpenGL ES2.0)
  • MCU (microcontroller) -- 1x ARM Cortex-M4
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) -- ARM Neon FPU
System RAM...
  • Maximum capacity (GB) -- 1
  • Type -- DDR3L
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 4.0
  • Type -- eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 3
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 1.4a
  • Max. HDMI resolution -- 1366x768
  • FPS at max. resolution -- 60
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- RGB LCD out up to 1366x768px; MIPI-DSI; touch support
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- 8-bit parallel input
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- 3.5mm jack
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 1
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 1
  • ADC -- 1
  • PWM -- 1
  • SPI -- 1
  • I2C -- 1
  • UARTs -- 1
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) -- Discrete power management
  • Lithium battery support -- CR1225 for backup
Operating system support...
  • Linux -- Debian Stretch; Yocto Linux; U-Boot bootloader
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

Other features:
* 80-pin board-to-board connector and 30-pin 2mm expansion connector
* Expansion connector signals include GPIO, I2C, SPI, CAN, TIM, UART, SDIO, ADC, USB, and FMC
* JTAG interface
* 2x blue LEDs
* Boot switch
* Backup battery input
* Power via terminal block or microUSB connectors
* Technical manual and board schematic available for download here

Options available:
* 0 to 70 or -40 to 85 deg. C operating temp range
* 4GB or 8GB eMMC
* 256MB or 512MB DDR3L RAM
* 800x480px, 7-inch touch LCD

Physical specs...
  • Width (mm) -- 106
  • Height (mm) -- 70
  • Depth (mm) -- 7
  • Weight (gm) -- 50
  • Input voltage, min. (V) -- 4.7
  • Input voltage, max. (V) -- 5.3
  • Input current, min. (A) -- 0.3
  • Input current, max. (A) -- 0.3
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 70
  • Certifications -- (none listed)
Further information...
[board ID = 367]

Share your impressions of this board with the HackerBoards community...