PicoCoreRT1

The PicoCoreRT1 is based on the NXP i.MX RT1050 “crossover” SoC, which uses a 600MHz-clocked Cortex-M7 core as its primary processor. The module offers on-board RAM and flash, plus 2x 80-pin expansion connectors with A/V, LAN, USB, SDIO, GPIO, and other I/O.

(47 views)

(click image to enlarge)

Product overview...
  • Board Name:   PicoCoreRT1
  • Category:   module
  • Model:  
  • Manufacturer:   FS Elektronik Systeme
  • Official website:   click here
  • Price (USD):   $440
  • Additional info may be found via this automated Google search
  • Posted 2020-08-18 12:00am
System-on-Chip...
  • NXP i.MX RT1050
  • Primary processor type:   ARM Cortex-M7
  • Primary processor word-width:   32-bit
  • Primary processor cores:   1
  • Primary processor clock rate (GHz):   0.6
Additional processors (if any)...
  • GPU (graphics):   2D
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   0.256
  • Type:   DDR3L
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   0.256
  • Type:   NAND
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   microSD (up to 64GB)
  • m.2 interfaces:   0
  • m.2 NVMe support:  
SATA support...
  • SATA ports:   0
USB ports...
  • USB host ports:   1
  • USB OTG ports:   1
  • USB port types:   2
Ethernet...
  • Ethernet interfaces:   1
  • Maximum LAN speed (Mbps):  
  • Wake-on-LAN support?  
Wireless...
  • WiFi:  
  • Bluetooth:  
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:   0
  • HDMI version:  
  • Max. HDMI resolution:  
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:   0
  • Other display interfaces (DSI, LVDS, VGA...):   16-bit RGB, supporting TFT up to WXGA
Camera interfaces...
  • Number of camera ports:   0
  • Camera interface types:  
Audio I/O...
  • Analog audio out:   1
  • Audio connector type:  
  • Audio via HDMI?   0
  • I2S interfaces:   1
  • SPDIF interfaces:   0
  • Line inputs:   1
  • Mic inputs:   1
  • On-board microphones:   0
Other I/O...
  • GPIO:   50
  • ADC:   1
  • PWM:   1
  • SPI:   2
  • I2C:   4
  • UARTs:   2
  • RS232 (or 485 or 422):   0
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:   yes
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:  
  • Android:  
  • Windows:  
  • Other OSes:   FreeRTOS
Other features not listed elsewhere...

* 2x 80-pin connectors on module bottom offer: 1x Ethernet, 2x USB, 2x CAN, 4x I2C, 2x SPI, 2x UART, Audio (Line In/ Out/ Mic/ Headphone or I2S), SDIO for SD slot, PWM, GPIO, and ADC
* Analog resistive touch support available via I2C
* Extended temperature operation of -40 to 85 deg. C is optionally available
* Long-term availabity through 2031

Physical specs...
  • Width (mm):   40
  • Height (mm):   35
  • Depth (mm):  
  • Weight (gm):   10
  • Input voltage, min. (V):   4.8
  • Input voltage, max. (V):   5.5
  • Input current, min. (A):   0.2
  • Input current, max. (A):   0.2
  • Operating temp., min. (°C):   0
  • Operating temp., max. (°C):   70
  • Certifications:  

Print Friendly, PDF & Email

(board ID = 460)

Share your impressions of this board with the HackerBoards community...