PicoCoreMX6SX

Tiny (35x40mm) computer-on-module based on an NXP i.MX 6SoloX SoC, and featuring 1GB RAM, 512MB SLC NAND or 1GB 32GB eMMC storage, I/O including 2x GbE, A/V, USB, UART, GPIOs, and SDIO, plus -20 to +85 deg.C operation.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX 6SoloX
  • Primary processor type -- ARM Cortex-A9
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 1
  • Primary processor clock rate (GHz) -- 0.8
Additional processors (if any)...
  • GPU (graphics) -- 3D, 2D
  • MCU (microcontroller) -- ARM Cortex-M4 @ 200MHz
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 1
  • Type -- DDR3L
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.5
  • Type -- 512MB SLC NAND or 32GB eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- none
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 1
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 16/ 24bit RGB
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- Other format, via pin header, etc.
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 1
  • Line inputs -- 1
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 0
  • ADC -- 0
  • PWM -- 8
  • SPI -- 2
  • I2C -- 3
  • UARTs -- 5
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- Buildroot / Yocto ; uboot preinstalled
  • Android --
  • Windows -- on request
  • Other OSes -- FreeRTOS
Other features not listed elsewhere:

* interfaces available via board-to-board connectors: ESAI, 3x SAI, SSI ADR/DATA bus, SDIO, up to 2x CAN, up to 5x UART, up to 3x I2C (supports audio in/out, touch), up to 2x SPI, up to 8x PWM, SPDIF, 16/24-bit RGB video
* Option: -20 to +85 deg. C operating temperature
* Long term availability to 2030

Physical specs...
  • Width (mm) -- 35
  • Height (mm) -- 40
  • Depth (mm) -- 0
  • Weight (gm) -- 10
  • Input voltage, min. (V) -- 3.8
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 0.6
  • Input current, max. (A) -- 1.1
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 70
  • Certifications -- ROHS
Further information...
[board ID = 397]

Share your impressions of this board with the HackerBoards community...