PicoCoreMX8MM

PicoCoreMX8MM is a tiny, low-power COM based on NXP’s 1.8GHz i.MX8M Mini SoC, featuring up to 8GB RAM and 32GB eMMC, I/O including WiFi/BT, LVDS, USB, serial, audio, PCIe, and more, as well as wide temperature operation.


(click image to enlarge)

Product overview...
  • Board Name -- PicoCoreMX8MM
  • Category -- module
  • Model --
  • Manufacturer -- FS Elektronik Systeme
  • Official website -- click here
  • Price -- (USD)
  • Additional info may be found via this automated Google search
  • Posted 2020-02-06 12:00am
System-on-Chip...
  • NXP i.MX8M Mini
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.8
Additional processors (if any)...
  • GPU (graphics) -- 3D, 2D
  • MCU (microcontroller) -- ARM Cortex-M4
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 8
  • Type -- LPDDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 32
  • Type -- eMMC (up to 32GB)
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB host ports -- 1
  • USB OTG ports -- 1
  • USB port types --
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11 ac/a/b/g/n
  • Bluetooth -- 5.0 LE
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 1x LVDS (24-bit 1366x768); 1x MIPI-DSI (4 lanes 1080p60)
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- MIPI-CSI
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- other (e.g. header pins)
  • Audio via HDMI? -- 0
  • I2S interfaces -- 1
  • SPDIF interfaces -- 1
  • Line inputs -- 1
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 0
  • ADC -- 0
  • PWM -- 8
  • SPI -- 2
  • I2C -- 4
  • UARTs -- 4
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- Buildroot/Yocto (uboot installed)
  • Android --
  • Windows --
  • Other OSes -- FreeRTOS
Other features not listed elsewhere:

* Additional features include: watchdog, ESAI, SAI, SSI ADR/DATA bus* Dual high-density connectors on bottom side contain all expansion signals* Optionally available rated for -20 to 85 deg. C operation* A starter kit including the module plus carrier board, display, cables, software, and documention is listed for 360 Euros

Physical specs...
  • Width (mm) -- 35
  • Height (mm) -- 40
  • Depth (mm) -- 0
  • Weight (gm) -- 10
  • Input voltage, min. (V) -- 3.8
  • Input voltage, max. (V) -- 3.8
  • Input current, min. (A) -- 3.8
  • Input current, max. (A) -- 3.8
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 70
  • Certifications -- RohS

Print Friendly, PDF & Email

[board ID = 409]

Share your impressions of this board with the HackerBoards community...