PicoCoreMX8MN

PicoCoreMX8MN is a tiny module based on NXP’s 1.5GHz i.MX8M Nano SoC, plus up to 8GB RAM, 32GB eMMC, up to 2x GbE, and optional WiFi/BT. The board’s expansion connectors offer MIPI-DSI, LVDS, MIPI-CSI, SDIO, I2C, SPI, UART, and PWM signals, plus power.

(195 views)

(click image to enlarge)

Product overview...
  • Board Name:   PicoCoreMX8MN
  • Category:   module
  • Model:  
  • Manufacturer:   FS Systeme
  • Official website:   click here
  • Price (USD):  
  • Additional info may be found via this automated Google search
  • NEW: Compare this board to others here
  • Posted 2021-03-12 5:01pm
System-on-Chip...
  • NXP i.MX8M Nano
  • Primary processor type:   Arm Cortex-A53
  • Primary processor word-width:   64-bit
  • Primary processor cores:   4
  • Primary processor clock rate (GHz):   1.5
Additional processors (if any)...
  • GPU (graphics):   3D GC7000 UltraLite
  • MCU (microcontroller):   Cortex-M7 (650MHz)
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   8
  • Type:   LPDDR4 or DDR3L
  • ECC support:   No
  • Factory installed?   No
On-board solid-state storage...
  • Maximum capacity (GB):   32
  • Type:   NAND (512MB max.) or eMMC (32GB max.)
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   2x SDIO (signals on expansion)
  • m.2 interfaces:  
  • m.2 NVMe support:  
SATA support...
  • SATA ports:  
USB ports...
  • USB host ports:  
  • USB OTG ports:   1
  • USB port types:   2.0
Ethernet...
  • Ethernet interfaces:   2
  • Maximum LAN speed (Mbps):   1000
  • Wake-on-LAN support?  
Wireless...
  • WiFi:   802.11ac (optional)
  • Bluetooth:   5.0 (optional)
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:  
  • HDMI version:  
  • Max. HDMI resolution:  
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:  
  • Other display interfaces (DSI, LVDS, VGA...):   LVDS, MIPI-DSI
Camera interfaces...
  • Number of camera ports:   1
  • Camera interface types:   MIPI-CSI
Audio I/O...
  • Analog audio out:   1
  • Audio connector type:   via expansion pins
  • Audio via HDMI?  
  • I2S interfaces:   1
  • SPDIF interfaces:   1
  • Line inputs:   1
  • Mic inputs:   1
  • On-board microphones:  
Other I/O...
  • GPIO:  
  • ADC:  
  • PWM:   4
  • SPI:   2
  • I2C:   4
  • UARTs:   4
  • RS232 (or 485 or 422):  
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions (if any)...
  • Real time clock (RTC) support:   yes
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:   Buildroot and Yocto BSPs
  • Android:  
  • Windows:  
  • Other OSes:   FreeRTOS support for Cortex-M7 core
Other features not listed elsewhere...

* 2x 100-position Hirose DF40C expansion connector include: PCIe, 2x SDIO, 2x GbE, 1x USB 2.0 OTG, LVDS (2x 24-bit), MIPI-DSI (1x 4-lane), MIPI-CSI, I2S audio in/out, 4x PWM, SPDIF, ESAI, SAI, SSI, and configurable GPIO for up to 4x UART, 1x CAN, 4x I2C, and 2x SPI
* Note: not all maximum values for expansion I/O functions can be used simultaneously
* Product datasheet indicates that the module is optionally available with solo, dual, or quad Cortex-A53 NXP SoC
* Optionally rated for -20 or -40 to +85 deg. C operating temp.
* Optional 360-Euro starter kit provides baseboard, display, cables, docs, and software
* Available up to at least 2029

Physical specs...
  • Width (mm):   40
  • Height (mm):   35
  • Depth (mm):  
  • Weight (gm):   10
  • Input voltage, min. (V):   3.8
  • Input voltage, max. (V):   5.5
  • Input current, min. (A):   0.5
  • Input current, max. (A):  
  • Operating temp., min. (°C):   0
  • Operating temp., max. (°C):   70
  • Certifications:  

Print Friendly, PDF & Email

(board ID = 529)

Share your impressions of this board with the HackerBoards community...