PicoCoreMX8MP

PicoCoreMX8MP is a tiny low-power module based on NXP’s 1.8GHz i.MX8M Plus SoC. Key features include up to 8GB RAM, 32GB eMMC, 2x GbE, WiFi/BT, LVDS, MIPI CSI and DSI, USB, serial, audio, various GPIOs, and wide temperature operation.

(266 views)

(click image to enlarge)

Product overview...
  • Board Name:   PicoCoreMX8MP
  • Category:   module
  • Model:  
  • Manufacturer:   FS Elektonik Systeme
  • Official website:   click here
  • Price (USD):  
  • Additional info may be found via this automated Google search
  • Posted 2021-02-08 1:38pm
System-on-Chip...
  • NXP i.MX8M Plus
  • Primary processor type:   Arm Cortex-A53
  • Primary processor word-width:   64-bit
  • Primary processor cores:   4
  • Primary processor clock rate (GHz):   1.8
Additional processors (if any)...
  • GPU (graphics):   3D, 2D
  • MCU (microcontroller):   800MHz Arm Cortex-M7
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   8
  • Type:   LPDDR4/DDR3L
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   32
  • Type:   512MB NAND or 32GB eMMC
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   2x SD (via expansion connectors)
  • m.2 interfaces:  
  • m.2 NVMe support:  
SATA support...
  • SATA ports:  
USB ports...
  • USB host ports:   1
  • USB OTG ports:   1
  • USB port types:   via edge connector
Ethernet...
  • Ethernet interfaces:   2
  • Maximum LAN speed (Mbps):   1000
  • Wake-on-LAN support?  
Wireless...
  • WiFi:   802.11 ac/a/b/g/n (optional)
  • Bluetooth:   5.0 LE (optional)
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:  
  • HDMI version:  
  • Max. HDMI resolution:  
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:  
  • Other display interfaces (DSI, LVDS, VGA...):   LVDS (1x 8-lane or 2x 4-lane), DSI (1x 4-lane), DVI
Camera interfaces...
  • Number of camera ports:   1
  • Camera interface types:   up to 2x MIPI-CSI
Audio I/O...
  • Analog audio out:   1
  • Audio connector type:   via edge connector
  • Audio via HDMI?  
  • I2S interfaces:   1
  • SPDIF interfaces:   1
  • Line inputs:   1
  • Mic inputs:   1
  • On-board microphones:  
Other I/O...
  • GPIO:  
  • ADC:  
  • PWM:   4
  • SPI:   2
  • I2C:   4
  • UARTs:   4
  • RS232 (or 485 or 422):  
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:   yes
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:   Buildroot/Yocto, uboot pre-installed
  • Android:  
  • Windows:  
  • Other OSes:   FreeRTOS
Other features not listed elsewhere...

* Additional features (some optional) include: watchdog, ESAI, SAI, SSI ADR/DATA bus, PCIe
* All expansion signals are accessed via 2x high-density connectors
* Note: not all expansion signals are available simultaneously
* Power consumption — 3W (typ.)
* Optionally available with a 2x or 4x Cortex-A53 cores
* Extended operating temp. options: -20 to 85 or -40 to 85 deg. C
* Optional starter kit (includes baseboard etc.)
* Long term availability through 2035
* Pricing TBD (available 1Q21)

Physical specs...
  • Width (mm):   35
  • Height (mm):   40
  • Depth (mm):  
  • Weight (gm):   10
  • Input voltage, min. (V):   3.8
  • Input voltage, max. (V):   5.5
  • Input current, min. (A):  
  • Input current, max. (A):  
  • Operating temp., min. (°C):   0
  • Operating temp., max. (°C):   70
  • Certifications:   RoHS

Print Friendly, PDF & Email

(board ID = 524)

Share your impressions of this board with the HackerBoards community...