Pine H64 Model B

The PINE H64 Model B is based on an Allwinner H6 SoC. It features up to 4GB RAM and 128GB eMMC, bootable microSD, WiFi, BT, USB 2.0 and 3.0, UART, SPI, I2C, GPIO, A/V outputs, and Raspberry Pi style expansion.

Sep. 19, 2019 2:41pm – The Pine H64 Model B SBC from Pine64 is based on a 4-core 64-bit Allwinner H6 backed by up to 3GB RAM.

(click image for a larger view)


Board description:

    The PINE H64 Model B is based on an Allwinner H6 SoC. It features up to 4GB RAM and 128GB eMMC, bootable microSD, WiFi, BT, USB 2.0 and 3.0, UART, SPI, I2C, GPIO, A/V outputs, and Raspberry Pi style expansion.

Overview... System-on-Chip...
  • Allwinner H6
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.8
Additional processors (if any)...
  • GPU (graphics) -- Mali T-720 MP2
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 3
  • Type -- LPDDR3
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.1
  • Type -- SPI for bootloader; optional eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface ype -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 3
  • USB host types -- 2x 2.0, 1x 3.0
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11n
  • Bluetooth -- 4
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 2.0a (HDCP2.2)
  • Max. HDMI resolution -- 4K
  • FPS at max. resolution -- 60
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- 3.5mm jack
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 1
  • Line inputs -- 1
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 22
  • ADC -- 0
  • PWM -- 1
  • SPI -- 1
  • I2C -- 2
  • UARTs -- 2
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- Yes
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- Yes
Miscellaneous functions...
  • Real time clock (RTC) support -- yes
  • PMIC/PMU (power management controllers) -- AXP805
  • Lithium battery support -- yes
Operating system support...
  • Linux -- Armbian, LibreElec
  • Android -- supported (likely 7.x)
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* 40-pin Raspberry Pi v2 expansion
* Euler expansion header with UART, SPI, AV, GPIOs, and speaker audio
* miniPCIe interface
* IR supports both receive and transmit
* HP A/V jack (per schematic)
* Power, reset, recovery buttons
* Available with up to 3GB RAM (price listed below is with 2GB)
* See wiki page for more details

Physical specs...
  • Width (mm) -- 85
  • Height (mm) -- 56
  • Depth (mm) -- 19
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 3
  • Input current, max. (A) -- 3
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications -- (none listed)
Further information...
[board ID = 349]

Share your impressions of this board with the HackerBoards community...