Portenta H7

The Portenta H7, based on a dual-core STM32H747 SoC, runs Arduino sketches on Arm Mbed OS. The SBC offers WiFi/BT, video, LAN, UART, SPI, I2C, and GPIO interfaces, and debuts a new 160-pin Arduino expansion standard.


(click image to enlarge)

Product overview...
  • Board Name -- Portenta H7
  • Category -- SBC
  • Model --
  • Manufacturer -- Arduino
  • Official website -- click here
  • Price -- $104 (USD)
  • Additional info may be found via this automated Google search
  • Posted 2020-10-01 2:37pm
System-on-Chip...
  • STM STM32H747
  • Primary processor type -- Arm Cortex-M7
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 1
  • Primary processor clock rate (GHz) -- 0.480
Additional processors (if any)...
  • GPU (graphics) -- Chrom-ART Accelerator
  • MCU (microcontroller) -- Arm Cortex-M4 at 240MHz
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 0.064
  • Type -- SDRAM
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.128
  • Type -- QSPI flash
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- SD (via expansion port)
  • m.2 interfaces --
  • m.2 NVMe support --
SATA support...
  • SATA ports --
USB ports...
  • USB host ports -- 1
  • USB OTG ports --
  • USB port types -- Type C Host/Device with DP out and +5V input
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) --
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- WiFi 802.11b/g/n
  • Bluetooth -- BLE 5.1
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports --
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
Other display interfaces...
  • Composite video (CVBS) ports --
  • Other display interfaces (DSI, LVDS, VGA...) -- MIPI DSI host + MIPI D-PHY
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- 8-bit (up to 80MHz)
Audio I/O...
  • Analog output ports --
  • Audio connector type --
  • Audio via HDMI? --
  • I2S interfaces -- 4
  • SPDIF interfaces --
  • Line inputs --
  • Mic inputs --
  • On-board microphones --
Other I/O...
  • GPIO -- 6
  • ADC -- 8
  • PWM -- 10
  • SPI -- 6
  • I2C -- 4
  • UARTs -- 4
  • RS232 (or 485 or 422) --
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support -- Li-Po, 3.7V, 700mAh
Operating system support...
  • Linux --
  • Android --
  • Windows --
  • Other OSes -- Arm Mbed OS, Arduino IDE
Other features not listed elsewhere:

* Software: runs Arduino sketches and native Mbed applications on top of Arm Mbed OS; also supports MicroPython and JavaScript (via interpreter) and TensorFlow Lite
* Wireless radio module — Murata 1DX (dual WiFi 802.11b/g/n + BT 5.1 BR/EDR/LE)
* Analog I/O — 3x 16-bit ADCs, 2x 12-bit DACs
* 2x 80-pin high density expansion interface; supports industrial MKR shields
* If wireless module is present, operating temperature range reduces to -10 to +55 deg. C

Physical specs...
  • Width (mm) -- 66
  • Height (mm) -- 25
  • Depth (mm) --
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) --
  • Input current, min. (A) -- 0.1
  • Input current, max. (A) --
  • Operating temp., min. (°C) -- -40
  • Operating temp., max. (°C) -- 85
  • Certifications -- ROHS

Print Friendly, PDF & Email

[board ID = 486]

Share your impressions of this board with the HackerBoards community...