
Product overview...
- Board Name: Pynq-Z2
- Category: SBC
- Model:
- Manufacturer: TUL
- Official website: click here
- Price (USD): $119
- Additional info may be found via this automated Google search
- Posted 2020-01-03 12:00am
- Xilinx ZYNQ XC7Z020-1CLG400C
- Primary processor type: ARM Cortex-A9
- Primary processor word-width: 32-bit
- Primary processor cores: 2
- Primary processor clock rate (GHz): 0.65
- GPU (graphics):
- MCU (microcontroller):
- FPGA (gates): XC7Z020
- Other (DSP, FPU, NPU, TPU, AI...):
- Maximum capacity (GB): 1
- Type: DDR3
- ECC support: No
- Factory installed? Yes
- Maximum capacity (GB):
- Type: quad-SPI flash
- Factory installed? Yes
- Interface type: microSD
- m.2 interfaces: 0
- m.2 NVMe support:
- SATA ports: 0
- USB host ports: 1
- USB OTG ports: 0
- USB port types: 2
- Ethernet interfaces: 1
- Maximum LAN speed (Mbps): 1000
- Wake-on-LAN support?
- WiFi:
- Bluetooth:
- Broadband:
- LoRa:
- Number of HDMI ports: 2
- HDMI version:
- Max. HDMI resolution:
- FPS at max. resolution:
- Composite video (CVBS) ports: 0
- Other display interfaces (DSI, LVDS, VGA...):
- Number of camera ports: 0
- Camera interface types:
- Analog audio out: 0
- Audio connector type: 3.5mm jack
- Audio via HDMI? 1
- I2S interfaces: 1
- SPDIF interfaces: 0
- Line inputs: 1
- Mic inputs: 0
- On-board microphones: 0
- GPIO: 16
- ADC: 0
- PWM: 0
- SPI: 0
- I2C: 0
- UARTs: 0
- RS232 (or 485 or 422): 0
- IR receiver: No
- Arduino compatible: Yes
- Raspberry Pi compatible: Yes
- Real time clock (RTC) support:
- PMIC/PMU (power management controllers):
- Lithium battery support:
- Linux: yes
- Android: yes
- Windows:
- Other OSes:
* ZYNQ XC7Z020-1CLG400C:
— 650MHz dual-core Cortex-A9 processor
— DDR3 memory controller with 8 DMA channels and
— High Performance AXI3 Slave ports
— High-bandwidth peripheral controllers: 1G Ethernet,
— USB 2.0, SDIO
— Low-bandwidth peripheral controller:
— SPI, UART, CAN, I2C
— Programmable from JTAG, Quad -SPI flash, and MicroSD card
— Programmable logic equivalent to Artix-7 FPGA
— 13,300 logic slices, each with four 6-input LUTs and 8 flip-flops
— 630 KB of fast block RAM
— 4x clock management tiles, each with a phase-locked loop (PLL) and mixed-mode clock manager (MMCM)
— 220 DSP slices
— On-chip analog-to-digital converter (XADC)
* Expansion connectors:
— 2x standard Pmod ports with 16x total FPGA I/O (8x shared pins with RPi connector)
— Arduino Shield connector with 24x total FPGA I/O, 6x single-ended 0-3.3V Analog inputs to XADC
— Raspberry Pi connector with 28x total FPGA I/O (8x shared pins with Pmod port)
* Other: 4x push-buttons, 2x slide switches, 4x LEDs, 2x RGB LEDs
- Width (mm): 87
- Height (mm): 140
- Depth (mm): 0
- Weight (gm):
- Input voltage, min. (V): 7
- Input voltage, max. (V): 15
- Input current, min. (A): 0
- Input current, max. (A): 0
- Operating temp., min. (°C):
- Operating temp., max. (°C):
- Certifications:
(board ID = 401)