Raspberry Pi Compute Module 3+

The Raspberry Pi Compute Module 3+ (CM3+) contains the guts of a Raspberry Pi 3 Model B+ — including a 1.2GHz Broadcom BCM2837 SoC and 1GB RAM along with up to 32GB of eMMC flash — all integrated onto a small board that fits into a standard DDR2 SODIMM connector on a carrier board. All remaining processor interfaces are available to a carrier board via the module’s edge-connector, including many more GPIOs and interfaces than are supported on a standard Raspberry Pi SBC. The module is available with 32GB, 16GB, 8GB, or 0GB of on-board eMMC. Note: the price indicated below is for the 0GB eMMC “CM3+/Lite” model.


(click image to enlarge)

Product overview...
  • Board Name:   Raspberry Pi Compute Module 3+
  • Category:   module
  • Model:   CM3+
  • Manufacturer:   Raspberry Pi Foundation
  • Official website:   click here
  • Price (USD):   $31
  • Additional info may be found via this automated Google search
  • Posted 2019-02-07 12:00am
System-on-Chip...
  • Broadcom BCM2837B0
  • Primary processor type:   ARM Cortex-A53 (ARMv8)
  • Primary processor word-width:   64-bit
  • Primary processor cores:   4
  • Primary processor clock rate (GHz):   1.2
Additional processors (if any)...
  • GPU (graphics):   VideoCore IV
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   1
  • Type:   LPDDR2
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   32
  • Type:   eMMC
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   microSD (up to 32GB)
  • m.2 interfaces:   0
  • m.2 NVMe support:  
SATA support...
  • SATA ports:   0
USB ports...
  • USB host ports:   1
  • USB OTG ports:   1
  • USB port types:   2
Ethernet...
  • Ethernet interfaces:   0
  • Maximum LAN speed (Mbps):  
  • Wake-on-LAN support?  
Wireless...
  • WiFi:  
  • Bluetooth:  
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:   1
  • HDMI version:   1.3a
  • Max. HDMI resolution:  
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:   1
  • Other display interfaces (DSI, LVDS, VGA...):   MIPI DSI (1x 4-lane, 1x 2-lane)
Camera interfaces...
  • Number of camera ports:   2
  • Camera interface types:   MIPI CSI (1x 4-lane, 1x 2-lane)
Audio I/O...
  • Analog audio out:   0
  • Audio connector type:  
  • Audio via HDMI?   1
  • I2S interfaces:   2
  • SPDIF interfaces:   0
  • Line inputs:   0
  • Mic inputs:   0
  • On-board microphones:   0
Other I/O...
  • GPIO:   48
  • ADC:   0
  • PWM:   2
  • SPI:   2
  • I2C:   2
  • UARTs:   2
  • RS232 (or 485 or 422):   0
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   Yes
Miscellaneous functions...
  • Real time clock (RTC) support:  
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:   yes
  • Android:  
  • Windows:  
  • Other OSes:  
Other features not listed elsewhere...
  • Power Supply: VBAT (2.5V to 5.0V) for the SoC processor core, 3.3V for PHYs, UI and eMMC flash, 1.8V for PHYs, IO, and SDRAM, VDAC (2.8V typ.) for video composite DAC, GPIO0-27_VREF & GPIO28-45_VREF (1.8 to 3.3V) for the two GPIO banks.
  • Carrier board interface: 200-pin edge connector.
  • Available with 0 to 32GB eMMC onboard. Price shown below is for the entry-level model with 0GB eMMC.
  • This product will be supported through at least 2024.
    Physical specs...
    • Width (mm):   68
    • Height (mm):   31
    • Depth (mm):   4
    • Weight (gm):  
    • Input voltage, min. (V):   2.5
    • Input voltage, max. (V):   5
    • Input current, min. (A):   0.7
    • Input current, max. (A):   1.4
    • Operating temp., min. (°C):   -25
    • Operating temp., max. (°C):   80
    • Certifications:  

    Print Friendly, PDF & Email

    [board ID = 317]
  • Share your impressions of this board with the HackerBoards community...