Renegade

Libre Computer’s “Renegade” is a Rockchip RK3328-based single board computer with Raspberry Pi-like form factor and pin header compatibility. It features 1 up to 4GB RAM, an eMMC 5.x storage slot (8 to 128 GB), HDMI 2.0 ([email protected]), and Gigabit Ethernet.

Sep. 14, 2019 4:37am – The Renegade SBC from Libre Computer is based on a 4-core 64-bit Rockchip RK3328 backed by up to 1GB RAM.

(click image for a larger view)


Board description:

    Libre Computer’s “Renegade” is a Rockchip RK3328-based single board computer with Raspberry Pi-like form factor and pin header compatibility. It features 1 up to 4GB RAM, an eMMC 5.x storage slot (8 to 128 GB), HDMI 2.0 ([email protected]), and Gigabit Ethernet.

Overview... System-on-Chip...
  • Rockchip RK3328
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.5
Additional processors (if any)...
  • GPU (graphics) -- Mali-450 MP2
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 1
  • Type -- DDR4 (up to 4GB)
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) --
  • Type -- 1x eMMC 5.x module socket (8GB-128GB)
  • Factory installed? -- No
Removable solid-state storage...
  • Interface ype -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 3
  • USB host types -- 1x 3.0 + 2x 2.0
  • USB OTG ports -- 0
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- 2.0a
  • Max. HDMI resolution -- 4k
  • FPS at max. resolution -- 60
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 1
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- 3.5mm jack
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 0
  • ADC -- 3
  • PWM -- 1
  • SPI -- 1
  • I2C -- 1
  • UARTs -- 2
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- Yes
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- Yes
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android -- Android 7.1 Nougat
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* HDMI: HDR10, HLG supported
* 2G + 2P ARM Mali-450: OpenGL ES 1.1 / 2.0; OpenVG 1.1
* Multi-Media Processor
* Decoders: VP9 P2 4K60, H.265 [email protected] 4K60, H.264 [email protected] 4K60, JPEG
* Encoders: H.265 1080P30 or 2x H.264 720P30, H.264 1080P30 or 2x H.264 720P30
* U-Boot Button
* ADC and UART headers
* Available with 1GB, 2GB, or 4GB RAM (priced at $35, $45, and $80 respectively)

Physical specs...
  • Width (mm) -- 85
  • Height (mm) -- 56
  • Depth (mm) -- 19
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 1
  • Input current, max. (A) -- 2.5
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications -- (none listed)
Further information...
[board ID = 218]

Share your impressions of this board with the HackerBoards community...