SBC-7530

The SBC-7530 SBC is based on NXP’s 800MHz i.MX6ULL SoC, along with 512MB RAM and 16GB eMMC. Key features include display, USB, UART, and GPIO interfaces, miniPCIe and SIM slots, and LAN and WiFi connectivity.


(click image to enlarge)

Product overview...
  • Board Name:   SBC-7530
  • Category:   SBC
  • Model:  
  • Manufacturer:   Artila
  • Official website:   click here
  • Price (USD):  
  • Additional info may be found via this automated Google search
  • Posted 2020-09-30 5:55pm
System-on-Chip...
  • NXP i.MX6ULL
  • Primary processor type:   Arm Cortex-A7 MPCore
  • Primary processor word-width:   32-bit
  • Primary processor cores:   1
  • Primary processor clock rate (GHz):   0.800
Additional processors (if any)...
  • GPU (graphics):  
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   0.512
  • Type:   LPDDR3
  • ECC support:   No
  • Factory installed?   Yes
On-board solid-state storage...
  • Maximum capacity (GB):   16
  • Type:   eMMC
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   SD
  • m.2 interfaces:  
  • m.2 NVMe support:  
SATA support...
  • SATA ports:  
USB ports...
  • USB host ports:   4
  • USB OTG ports:   2
  • USB port types:   2x OTG/HOST
Ethernet...
  • Ethernet interfaces:   2
  • Maximum LAN speed (Mbps):   100
  • Wake-on-LAN support?  
Wireless...
  • WiFi:   802.11b/g/n
  • Bluetooth:  
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:  
  • HDMI version:  
  • Max. HDMI resolution:  
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:  
  • Other display interfaces (DSI, LVDS, VGA...):   LVDS (24-bit RGB; 1366x768 at 60fps)
Camera interfaces...
  • Number of camera ports:  
  • Camera interface types:  
Audio I/O...
  • Analog audio out:   2
  • Audio connector type:   3.5mm jack
  • Audio via HDMI?  
  • I2S interfaces:  
  • SPDIF interfaces:  
  • Line inputs:  
  • Mic inputs:  
  • On-board microphones:  
Other I/O...
  • GPIO:   8
  • ADC:  
  • PWM:  
  • SPI:  
  • I2C:   1
  • UARTs:   4
  • RS232 (or 485 or 422):   3
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:  
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:   Linux kernel 5.4.x
  • Android:  
  • Windows:  
  • Other OSes:  
Other features not listed elsewhere...

* 2x digital inputs
* 2x CAN bus 2.0 A/B ports (1Mbps)
* 1x relay output (30VDC at 1A or 125VAC at 0.5A)
* Optional miniPCIe slot with micro-SIM socket
* Optional SD card socket (supports SDHC)
* Optional LVDS (24-bits) interface
* Optional TTL display interface
* 1x touch sensor interface
* 1x full-size miniPCIe socket
* 1x temperature sensor
* Watchdog timer
* Real-time clock
* 4x LEDs — power, ready, status 1, status 2
* 0.75W typical power consumption

Physical specs...
  • Width (mm):   150
  • Height (mm):   115
  • Depth (mm):  
  • Weight (gm):  
  • Input voltage, min. (V):   9
  • Input voltage, max. (V):   48
  • Input current, min. (A):  
  • Input current, max. (A):  
  • Operating temp., min. (°C):  
  • Operating temp., max. (°C):  
  • Certifications:  

Print Friendly, PDF & Email

[board ID = 485]

Share your impressions of this board with the HackerBoards community...