SBC-C20

The SBC-C20 is based on a quad- or dual-core NXP i.MX8M SoC and features up to 2GB DDR3L RAM, microSD and up to 16GB eMMC storage, multiple graphics, USB, serial, and GPIO interfaces, plus GbE and optional WiFi, BT, and WWAN support.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX8M Quad, QuadLite, or Dual
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.5
Additional processors (if any)...
  • GPU (graphics) -- Vivante GC7000Lite
  • MCU (microcontroller) -- Cortex-M4 @266MHz
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 2
  • Type -- DDR3L
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 16.0
  • Type -- eMMC
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 1
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 4
  • USB host types -- 2x 3.0 + 2x 2.0
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11a/b/g/n (option)
  • Bluetooth -- BT 4.2 LE (option)
  • Broadband -- optional, via M.2 socket
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version --
  • Max. HDMI resolution -- 4k
  • FPS at max. resolution -- 60
  • HDMI audio support? -- Yes
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- eDP 1.4, optional HDMI, optional LVDS
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- 4-lane MIPI-CSI
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- Other format, via pin header, etc.
  • Audio via HDMI? -- Yes
  • SPDIF interfaces -- 0
  • Line inputs -- 1
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 8
  • ADC -- 0
  • PWM -- 0
  • SPI -- 1
  • I2C -- 1
  • UARTs -- 2
  • RS232 (or 485 or 422) -- 1
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) -- yes
  • Lithium battery support -- coin cell for RTC backup
Operating system support...
  • Linux -- Wind River Linux LTS, Yocto Linux
  • Android -- Android
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* 3.5-inch SBC form-factor
* Available with Quad, QuadLite, or Dual i.MX8 SoCs
* Dedicated VPU (not for QuadLite)
* Dual display support
* Optional -40 to +85°C support
* I2C touch-screen interface
* Optional 10W amplified audio output
* LVDS for up to 1920×180 displays
* CAN interface
* JTAG interface

Physical specs...
  • Width (mm) -- 147
  • Height (mm) -- 102
  • Depth (mm) -- 0
  • Weight (gm) --
  • Input voltage, min. (V) -- 12
  • Input voltage, max. (V) -- 12
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 60
  • Certifications -- (none listed)
Further information...
[board ID = 339]

Share your impressions of this board with the HackerBoards community...