SM2S-ZUSP

The SM2S-ZUSP COM is built around Xilinx’s Zynq UltraScale+ SoC, with up to 4x 1.5GHz ARM Cortex-A53 cores, 2x Cortex-R5 real-time cores, and a Mali-400 MP2 GPU and up to 256K FPGA logic cells.


(click image to enlarge)

Product overview...
  • Board Name -- SM2S-ZUSP
  • Category -- module
  • Model --
  • Manufacturer -- MSC Technologies
  • Official website -- click here
  • Price -- (USD)
  • Additional info may be found via this automated Google search
  • Posted 2019-05-03 12:00am
System-on-Chip...
  • Xilinx UltraScale+
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.5
Additional processors (if any)...
  • GPU (graphics) -- ARM Mali-400 MP2
  • MCU (microcontroller) -- ARM Cortex-R5
  • FPGA (gates) -- Up to 256K logic cells
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 8
  • Type -- DDR4
  • ECC support -- Yes
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 64
  • Type -- eMMC
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- Other format
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 1
USB ports...
  • USB host ports -- 4
  • USB OTG ports -- 0
  • USB port types -- 1x 3.0/2.0, 2x 2.0, 1x 2.0 Host/Client
Ethernet...
  • Ethernet interfaces -- 2
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 18/24-bit LVDS, DisplayPort 1.2a
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- MIPI-CSI2
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type --
  • Audio via HDMI? -- 0
  • I2S interfaces -- 0
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 72
  • ADC -- 0
  • PWM -- 0
  • SPI -- 2
  • I2C -- 3
  • UARTs -- 2
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android -- yes
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* SMARC 2.0 complaint form-factor
* All I/O and control signals and DC power are accessed via the SMARC edge connector
* 1x MMC/SSD/SDIO interface
* 1x PCIe Gen 2 with ZU2/3 or 2x PCIe x2 Gen 3 with ZU4/5 devices
* Includes watchdog timer
* Option: up to 2GB dedicated DDR4 SDRAM for FPGA use
* Option: soldered-on wireless module with MU-MIMO 2×2 802.11 ac/a/b/g/n and BT/BLE
* Option: -40 to +85°C extended operating temperature
* Option: MSC SM2-MB-EP1 carrier board

Physical specs...
  • Width (mm) -- 82
  • Height (mm) -- 50
  • Depth (mm) -- 0
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) -- 0
  • Operating temp., max. (°C) -- 70
  • Certifications -- UL, CE

Print Friendly, PDF & Email

[board ID = 345]

Share your impressions of this board with the HackerBoards community...