
Product overview...
- Board Name: TIGER Board
- Category: SBC
- Model:
- Manufacturer: ALi Corporation
- Official website: click here
- Price (USD): $62
- Additional info may be found via this automated Google search
- Posted 2017-01-01 12:00am
- ALi M3733
- Primary processor type: ARM Cortex-A9
- Primary processor word-width: 32-bit
- Primary processor cores: 4
- Primary processor clock rate (GHz): 1.7
- GPU (graphics): Mali-400 MP2
- MCU (microcontroller):
- FPGA (gates):
- Other (DSP, FPU, NPU, TPU, AI...):
- Maximum capacity (GB): 1
- Type:
- ECC support: No
- Factory installed? Yes
- Maximum capacity (GB): 4
- Type:
- Factory installed? Yes
- Interface type: microSD (up to 64GB)
- m.2 interfaces: 0
- m.2 NVMe support:
- SATA ports: 0
- USB host ports: 3
- USB OTG ports: 1
- USB port types: 1x USB 3.0; 2x USB 2.0
- Ethernet interfaces: 1
- Maximum LAN speed (Mbps): 100
- Wake-on-LAN support?
- WiFi: 802.11b/g/n
- Bluetooth: 4
- Broadband:
- LoRa:
- Number of HDMI ports: 1
- HDMI version:
- Max. HDMI resolution:
- FPS at max. resolution:
- Composite video (CVBS) ports: 1
- Other display interfaces (DSI, LVDS, VGA...):
- Number of camera ports: 0
- Camera interface types:
- Analog audio out: 1
- Audio connector type: 3.5mm jack
- Audio via HDMI? 1
- I2S interfaces: 1
- SPDIF interfaces: 0
- Line inputs: 0
- Mic inputs: 0
- On-board microphones: 0
- GPIO: 63
- ADC: 0
- PWM: 2
- SPI: 1
- I2C: 1
- UARTs: 1
- RS232 (or 485 or 422): 0
- IR receiver: Yes
- Arduino compatible: No
- Raspberry Pi compatible: Yes
- Real time clock (RTC) support:
- PMIC/PMU (power management controllers):
- Lithium battery support:
- Linux: yes
- Android: supported (GoDroid ROM)
- Windows:
- Other OSes:
Supports HDMI output with CEC and HDCP
– Supports simultaneous output of HDMI and CVBS
– 80-pins in two headers, J3 and J4. J3 compatible with Raspberry Pi
– 11 LEDs to indicate different status
– Embedded Power Management Unit (PMU)
- Width (mm): 93
- Height (mm): 60
- Depth (mm): 13
- Weight (gm): 42
- Input voltage, min. (V): 5
- Input voltage, max. (V): 5
- Input current, min. (A): 1
- Input current, max. (A): 2
- Operating temp., min. (°C):
- Operating temp., max. (°C):
- Certifications:
(board ID = 101)