Trizeps VIII mini

The Trizeps VIII Mini is based on NXP’s i.MX 8M Mini SoC plus up to 4GB RAM and micro-SD or eMMC flash, and an optional FPGA. Interfaces include audio I/O, DSI, CSI, LVDS, CAN, ADC, UART, SPI, GPIO, I2C, GbE, WiFi/BT, and an optional FPGA.


(click image for a larger view)


Overview... System-on-Chip...
  • NXP i.MX 8M Mini
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.8
Additional processors (if any)...
  • GPU (graphics) --
  • MCU (microcontroller) -- Kinetis V ARM Cortex-M0; Cortex-M4 (in i.MX 8M Mini SoC))
  • FPGA (gates) -- Up to 4300 LUTs (optional)
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 4
  • Type -- LPDDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) --
  • Type -- micro-SD slot or eMMC
  • Factory installed? -- No
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 0
  • USB host types --
  • USB OTG ports -- 0
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11 a/b/g/n/ac 2x2 MU-MIMO
  • Bluetooth -- 4.2, 5.0
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- 4-channel MIPI or single/dual-LVDS or 24-bit RGB
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- 4-channel CSI, 8-bit parallel
Audio I/O...
  • Analog output ports -- 2
  • Audio connector type -- n/a
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 1
  • Line inputs -- 2
  • Mic inputs -- 1
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 1
  • ADC -- 1
  • PWM -- 1
  • SPI -- 1
  • I2C -- 2
  • UARTs -- 4
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) -- yes (unspecified)
  • Lithium battery support --
Operating system support...
  • Linux -- Linux 4.14
  • Android -- Android 9
  • Windows -- Windows 10 IoT Core
  • Other OSes --
Other features not listed elsewhere:

* Many of the module’s optional features are based on programming the on-board FPGA
* 10-years “form-fit-function” availability
* Module is compatible with Keith & Koep’s "SODIMM 200" form-factor
* A similar "Trizeps VIII" module, based on an NXP i.MX 8M SoC, is also available

Physical specs...
  • Width (mm) -- 68
  • Height (mm) -- 37
  • Depth (mm) -- 7
  • Weight (gm) --
  • Input voltage, min. (V) -- 3.3
  • Input voltage, max. (V) -- 3.3
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) -- -25
  • Operating temp., max. (°C) -- 85
  • Certifications -- RoHS, REACH, WEEE
Further information...
[board ID = 368]

Share your impressions of this board with the HackerBoards community...