(click image for a larger view)
Overview...
- Board Name -- TS-7180
- Category -- SBC
- Model (if known) --
- Manufacturer -- Technologic
- Official website -- https://www.embeddedarm.com/products/TS-7180
- Price (if known) -- (USD)
- Additional info may be found via this automated Google search
- Dated posted -- Feb. 12, 2019 5:04pm
- NXP i.MX6UL
- Primary processor type -- ARM Cortex-A7
- Primary processor word-width -- 32-bit
- Primary processor cores -- 1
- Primary processor clock rate (GHz) -- 0.7
- GPU (graphics) --
- MCU (microcontroller) --
- FPGA (gates) --
- Other (DSP, FPU, NPU, TPU, AI...) --
- Maximum capacity (GB) -- 1
- Type --
- ECC support -- No
- Factory installed? -- Yes
- Maximum capacity (GB) -- 4.0
- Type -- eMMC MLC
- Factory installed? -- Yes
- Interface type -- microSD
- m.2 interfaces -- 0
- m.2 NVMe support --
- SATA ports -- 0
- USB hosts -- 2
- USB host types --
- USB OTG ports -- 1
- Ethernet interfaces -- 2
- Maximum LAN speed (Mbps) -- 100
- Wake-on-LAN support? --
- WiFi -- 802.11b/g/n (built-in antenna)
- Bluetooth -- 4.0 BLE
- Broadband -- Socket for MultiTech or NimbeLink Cell Modem
- LoRa --
- Number of HDMI ports -- 0
- HDMI version --
- Max. HDMI resolution --
- FPS at max. resolution --
- HDMI audio support? -- Yes
- Composite video (CVBS) ports -- 0
- Other display interfaces (DSI, LVDS, VGA...) --
- Number of camera ports -- 0
- Camera interface types --
- Analog output ports -- 0
- Audio connector type -- n/a
- Audio via HDMI? -- Yes
- SPDIF interfaces -- 0
- Line inputs -- 0
- Mic inputs -- 0
- On-board microphones -- 0
- GPIO -- 7
- ADC -- 4
- PWM -- 1
- SPI -- 1
- I2C -- 1
- UARTs -- 4
- RS232 (or 485 or 422) -- 3
- IR receiver -- No
- Arduino compatible -- No
- Raspberry Pi compatible -- No
- Real time clock (RTC) support -- yes
- PMIC/PMU (power management controllers) --
- Lithium battery support --
- Linux -- yes
- Android --
- Windows --
- Other OSes --
* Available with either 512MB or 1GB RAM
* Also includes a Cypress 16kbit FRAM for critical data retention
* USB ports: 1x Host, 1x Device, 1x OTG (via daughter card header
* Serial ports: 1x TTL, 3x RS-232, 1x RS-485
* Other buses: 1x each of SPI, I2C, CAN
* Socket for MultiTech or NimbleLink cellular modems, or Digi XBee radios
* Additional I/O pins: 1x PWM, 2x Quadrature counter, 2x Tachometer pins
* TS-SILO super capacitor offers up to 30 seconds hold-up power
- Width (mm) -- 112
- Height (mm) -- 112
- Depth (mm) -- 0
- Weight (gm) --
- Input voltage, min. (V) -- 8
- Input voltage, max. (V) -- 30
- Input current, min. (A) -- 0.6
- Input current, max. (A) -- 6.4
- Operating temp., min. (°C) -- -40
- Operating temp., max. (°C) -- 85
- Certifications -- (none listed)
- Official website -- https://www.embeddedarm.com/products/TS-7180
- Additional info on the web -- automated Google search...