TS-7680

The TS-7680 is an embedded computer powered by a 454MHz ARM CPU that offers a great balance between industrial features, such as a 24-position rugged screw terminal connector and 3-Amp relays, and high end capabilities, such as WiFi and Bluetooth. The TS-7680 offers low power and low cost at industrial grade, including industrial temperature operation and rugged enclosure with DIN mount. Power input allows 8 to 40 VDC as well as 10 to 28 VAC, making this product also suitable for the HVAC and building automation and control systems industry. Additional features include 2x 10/100Mbps Ethernet ports, 1x micro SD socket, 4 GB eMMC Flash, 2x USB Host, 2x CAN ports, 2x RS-485, high precision, battery-backed RTC, 30V tolerant DIO, analog IO, and more. The TS-7680 also offers a sub-watt low power operation mode as well as sleep mode for even lower power consumption. The TS-7680 ships with Linux 3.14.28 and Debian Jessie running out of the box on the onboard flash storage.

(13 views)

(click image to enlarge)

Product overview...
  • Board Name:   TS-7680
  • Category:   SBC
  • Model:  
  • Manufacturer:   Technologic Systems
  • Official website:   click here
  • Price (USD):   $203
  • Additional info may be found via this automated Google search
  • Posted 2017-01-01 12:00am
System-on-Chip...
  • NXP i.MX286
  • Primary processor type:   ARM926EJ-S
  • Primary processor word-width:   32-bit
  • Primary processor cores:   1
  • Primary processor clock rate (GHz):   0.45
Additional processors (if any)...
  • GPU (graphics):   N/A
  • MCU (microcontroller):  
  • FPGA (gates):  
  • Other (DSP, FPU, NPU, TPU, AI...):  
System RAM...
  • Maximum capacity (GB):   0
  • Type:  
  • ECC support:   No
  • Factory installed?   No
On-board solid-state storage...
  • Maximum capacity (GB):  
  • Type:  
  • Factory installed?   Yes
Removable solid-state storage...
  • Interface type:   microSD (up to 32GB)
  • m.2 interfaces:   0
  • m.2 NVMe support:  
SATA support...
  • SATA ports:   0
USB ports...
  • USB host ports:   2
  • USB OTG ports:   0
  • USB port types:   2
Ethernet...
  • Ethernet interfaces:   2
  • Maximum LAN speed (Mbps):   100
  • Wake-on-LAN support?  
Wireless...
  • WiFi:   802.11 b/g/n
  • Bluetooth:   4.0 LE
  • Broadband:  
  • LoRa:  
HDMI...
  • Number of HDMI ports:   0
  • HDMI version:  
  • Max. HDMI resolution:  
  • FPS at max. resolution:  
Other display interfaces...
  • Composite video (CVBS) ports:   0
  • Other display interfaces (DSI, LVDS, VGA...):  
Camera interfaces...
  • Number of camera ports:   0
  • Camera interface types:  
Audio I/O...
  • Analog audio out:   0
  • Audio connector type:  
  • Audio via HDMI?   0
  • I2S interfaces:   0
  • SPDIF interfaces:   0
  • Line inputs:   0
  • Mic inputs:   0
  • On-board microphones:   0
Other I/O...
  • GPIO:   8
  • ADC:   4
  • PWM:   0
  • SPI:   0
  • I2C:   0
  • UARTs:   5
  • RS232 (or 485 or 422):   2
  • IR receiver:   No
Expansion connector compatibility?
  • Arduino compatible:   No
  • Raspberry Pi compatible:   No
Miscellaneous functions...
  • Real time clock (RTC) support:   yes
  • PMIC/PMU (power management controllers):  
  • Lithium battery support:  
Operating system support...
  • Linux:   yes
  • Android:  
  • Windows:  
  • Other OSes:  
Other features not listed elsewhere...

Digital I/O: 18x (15x 3.3V; 3x Open-drain, 300mA Sink, 30V Tol.), 2x CAN, 38 Pin Expansion Header, TS-SILO (Super Cap providing 20 – 60 seconds of power hold),

Physical specs...
  • Width (mm):   112
  • Height (mm):   122
  • Depth (mm):   0
  • Weight (gm):  
  • Input voltage, min. (V):   8
  • Input voltage, max. (V):   40
  • Input current, min. (A):   0
  • Input current, max. (A):   0.2
  • Operating temp., min. (°C):   -40
  • Operating temp., max. (°C):   85
  • Certifications:  

Print Friendly, PDF & Email

(board ID = 162)

Share your impressions of this board with the HackerBoards community...